Teknik Belgeler
Özellikler
Marka
Schneider ElectricMaksimum Ani Akım
20kA
Aralık
Acti 9
Seri
iPRD
Elektrik Fazı
3
Montaj Stili
DIN Rayı
Darbe Boşalma Akımı
5kA
Uzunluk
81mm
Genişlik
72mm
Derinlik
69mm
Boyutlar
81 x 72 x 69mm
Minimum Çalışma Sıcaklığı
-25°C
Maksimum Çalışma Sıcaklığı
+60°C
Çalışma Sıcaklığı Aralığı
-25 → +60 °C
Menşe
China
Ürün Ayrıntıları
Acti9 iPRD Surge Arresters
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
Schneider ElectricMaksimum Ani Akım
20kA
Aralık
Acti 9
Seri
iPRD
Elektrik Fazı
3
Montaj Stili
DIN Rayı
Darbe Boşalma Akımı
5kA
Uzunluk
81mm
Genişlik
72mm
Derinlik
69mm
Boyutlar
81 x 72 x 69mm
Minimum Çalışma Sıcaklığı
-25°C
Maksimum Çalışma Sıcaklığı
+60°C
Çalışma Sıcaklığı Aralığı
-25 → +60 °C
Menşe
China
Ürün Ayrıntıları
Acti9 iPRD Surge Arresters
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.