Seeit PRESTO, Evrensel Programlayıcı, AT, CC Serisi Mikrodenetleyiciler, Bellek Cihazları, MSP, PIC İle Kullanım
Teknik Belgeler
Özellikler
Marka
SeeitAksesuar Tipi
Evrensel Programlayıcı
Şununla Birlikte Kullanım İçin
AT, CC Serisi Mikrodenetleyiciler, Bellek Cihazları, MSP, PIC
Arabirim
JTAG, Seri SPI
Programcı Adı
PRESTO
Bellek Türü Programlanmış
EEPROM, FLASH
Menşe
France
Ürün Ayrıntıları
Seeit PRESTO Programmer
The Seeit PRESTO is a universal SPI programmer which enables quick and easy programming of a range of different microcontrollers (MCUs). The PRESTO module is compatible with Microchip PIC MCUs, AVR ATMEL MCUs and serial EEPROMs. A full list of compatible MCU devices can be found on the datasheet.
The Seeit PRESTO connects to your PC via USB and connects directly to the MCU device with the attached 7 wires. The PRESTO module connects to devices soldered on the PCB with special packages, without having to add any adapters. You do not require an external power supply either as the PRESTO is powered via your PC.
The “GO” button on the front of the PRESTO allows you to start programming quickly. The LEDs on the programmer indicate status, so you don’t require a PC, keyboard or mouse, if you wish.
PC Based Programmers
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
10.657,03 TL
Each KDV Hariç
12.788,44 TL
Each KDV Dahil
1
10.657,03 TL
Each KDV Hariç
12.788,44 TL
Each KDV Dahil
1
Teknik Belgeler
Özellikler
Marka
SeeitAksesuar Tipi
Evrensel Programlayıcı
Şununla Birlikte Kullanım İçin
AT, CC Serisi Mikrodenetleyiciler, Bellek Cihazları, MSP, PIC
Arabirim
JTAG, Seri SPI
Programcı Adı
PRESTO
Bellek Türü Programlanmış
EEPROM, FLASH
Menşe
France
Ürün Ayrıntıları
Seeit PRESTO Programmer
The Seeit PRESTO is a universal SPI programmer which enables quick and easy programming of a range of different microcontrollers (MCUs). The PRESTO module is compatible with Microchip PIC MCUs, AVR ATMEL MCUs and serial EEPROMs. A full list of compatible MCU devices can be found on the datasheet.
The Seeit PRESTO connects to your PC via USB and connects directly to the MCU device with the attached 7 wires. The PRESTO module connects to devices soldered on the PCB with special packages, without having to add any adapters. You do not require an external power supply either as the PRESTO is powered via your PC.
The “GO” button on the front of the PRESTO allows you to start programming quickly. The LEDs on the programmer indicate status, so you don’t require a PC, keyboard or mouse, if you wish.