Teknik Belgeler
Özellikler
Marka
SeeitAksesuar Tipi
Evrensel Programlayıcı
Şununla Birlikte Kullanım İçin
ARM9 32 bit MCU
Arabirim
USB 2.0
Programcı Adı
SUPERPRO-6100
Menşe
China
Ürün Ayrıntıları
SUPERPRO-6100, Universal Programmer ZIF48 Socket Expandable to 144 Pins, USB 2.0 Port or Stand-Alone Mode
The SuperPro-6100N is an universal programmer equipped with ARM7 processor in USB-2. Thanks to its ZIF48 socket it can program over 103.000 different components among EPROMs, EEPROMs, FLASHs, PLDs and microcontrollers. Over, it can program components, as BGA package, until 144 programmable pins drivers thanks to its interchangeable socket. A LCD display screen of 20 x 2 characters as well as a keypad allow to use this programmer in stand-alone mode. This mode enables it, thanks to the addition of a classical compact Flash card CF-512MB (CF-1GB optional) inserted in the back of the programmer, to download numerous algorithms in the SuperPro-6100N. Therefore, this allows it to operate without a computer in cases when you need to use it away from the office, or just to use the SuperPro-6100N as a production programmer to make copies very quickly with the automatic detection of a devices presence to start programming (5 times faster than when it is connected to a PC). It can program low-voltage components until 1,2V. It does not need any adapters for all components in DIP package. The programming is extremely fast thanks to the use of algorithm technology downloaded in the CPU of the programmer during the selection of a device. The SuperPro-6100N can also test the pins of the inserted device to detect possible faults : incorrect insertion of the device, defective pin...etc. It is also protected against shorts and overvoltage. An ISP adapter permits to program components soldered on printed circuits or devices in special packages. The software works with Windows XP/Windows7/Windows8/Windows10 (32/64 bits) It allows advanced production functions such as automatic programming as soon as the device is detected, verification of the device ID and automatic generation of serial numbers in the device. Software updates are free.
118.326,30 TL
118.326,30 TL Each (KDV Hariç)
141.991,56 TL
141.991,56 TL Each KDV Dahil
1
118.326,30 TL
118.326,30 TL Each (KDV Hariç)
141.991,56 TL
141.991,56 TL Each KDV Dahil
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
SeeitAksesuar Tipi
Evrensel Programlayıcı
Şununla Birlikte Kullanım İçin
ARM9 32 bit MCU
Arabirim
USB 2.0
Programcı Adı
SUPERPRO-6100
Menşe
China
Ürün Ayrıntıları
SUPERPRO-6100, Universal Programmer ZIF48 Socket Expandable to 144 Pins, USB 2.0 Port or Stand-Alone Mode
The SuperPro-6100N is an universal programmer equipped with ARM7 processor in USB-2. Thanks to its ZIF48 socket it can program over 103.000 different components among EPROMs, EEPROMs, FLASHs, PLDs and microcontrollers. Over, it can program components, as BGA package, until 144 programmable pins drivers thanks to its interchangeable socket. A LCD display screen of 20 x 2 characters as well as a keypad allow to use this programmer in stand-alone mode. This mode enables it, thanks to the addition of a classical compact Flash card CF-512MB (CF-1GB optional) inserted in the back of the programmer, to download numerous algorithms in the SuperPro-6100N. Therefore, this allows it to operate without a computer in cases when you need to use it away from the office, or just to use the SuperPro-6100N as a production programmer to make copies very quickly with the automatic detection of a devices presence to start programming (5 times faster than when it is connected to a PC). It can program low-voltage components until 1,2V. It does not need any adapters for all components in DIP package. The programming is extremely fast thanks to the use of algorithm technology downloaded in the CPU of the programmer during the selection of a device. The SuperPro-6100N can also test the pins of the inserted device to detect possible faults : incorrect insertion of the device, defective pin...etc. It is also protected against shorts and overvoltage. An ISP adapter permits to program components soldered on printed circuits or devices in special packages. The software works with Windows XP/Windows7/Windows8/Windows10 (32/64 bits) It allows advanced production functions such as automatic programming as soon as the device is detected, verification of the device ID and automatic generation of serial numbers in the device. Software updates are free.