Selco Isı Sigorta 10 A +144°C
Teknik Belgeler
Özellikler
Marka
Selcoİşler Durumdaki Sıcaklık
+144°C
Tutma Sıcaklığı
+119°C
Maksimum Akım
10 A
Gerilim Değeri
250V ac
Kablo Yönü
Eksenel
Seri
SWTC Series
Gövde Çapı
4mm
Gövde Yüksekliği
10mm
Tel Çapı
1mm
Tel Uzunluğu
35mm
Menşe
Korea, Republic Of
Ürün Ayrıntıları
Selco SWTC/STC Series Thermal Fuses
Professional range of SWTC/STC series thermal fuses from Selco. These one-shot thermal cut-offs are designed to provide upper limit temperature protection for many electronic products. When the temperature is under normal operating temperature, the solid pallet compresses a spring which holds a star contact against the isolated lead. When the temperature is at fault the pallet melts and the circuit is opened permanently. All models are highly reliable and excellent quality.
PCB Wire Ended
Thermal fuses protect equipment against fire or thermal damage due to overload or overcharge. Suitable for use with standard single phase supplies up to 250V (230V typical). Temperature gradient: 1°C per minute.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
10
Teklif İsteyiniz
10
Teknik Belgeler
Özellikler
Marka
Selcoİşler Durumdaki Sıcaklık
+144°C
Tutma Sıcaklığı
+119°C
Maksimum Akım
10 A
Gerilim Değeri
250V ac
Kablo Yönü
Eksenel
Seri
SWTC Series
Gövde Çapı
4mm
Gövde Yüksekliği
10mm
Tel Çapı
1mm
Tel Uzunluğu
35mm
Menşe
Korea, Republic Of
Ürün Ayrıntıları
Selco SWTC/STC Series Thermal Fuses
Professional range of SWTC/STC series thermal fuses from Selco. These one-shot thermal cut-offs are designed to provide upper limit temperature protection for many electronic products. When the temperature is under normal operating temperature, the solid pallet compresses a spring which holds a star contact against the isolated lead. When the temperature is at fault the pallet melts and the circuit is opened permanently. All models are highly reliable and excellent quality.
PCB Wire Ended
Thermal fuses protect equipment against fire or thermal damage due to overload or overcharge. Suitable for use with standard single phase supplies up to 250V (230V typical). Temperature gradient: 1°C per minute.