Yarı İletken Kontaktörü, 230 V ac, 3P
Teknik Belgeler
Özellikler
Marka
Sensata / CrydomMontaj Tipi
DIN Rayı
Kontrol Gerilim Aralığı
208 → 265V ac/dc
Kutupların Sayısı
3
Terminal Tipi
Vida
Yük Gerilimi Aralığı
48 V ac → 510V ac
Seri
DRC
Yükseklik
86.71mm
Maksimum Çalışma Sıcaklığı
+80°C
Derinlik
96.02mm
Uzunluk
45.31mm
Minimum Çalışma Sıcaklığı
-30°C
Menşe
Mexico
Ürün Ayrıntıları
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
Sensata / CrydomMontaj Tipi
DIN Rayı
Kontrol Gerilim Aralığı
208 → 265V ac/dc
Kutupların Sayısı
3
Terminal Tipi
Vida
Yük Gerilimi Aralığı
48 V ac → 510V ac
Seri
DRC
Yükseklik
86.71mm
Maksimum Çalışma Sıcaklığı
+80°C
Derinlik
96.02mm
Uzunluk
45.31mm
Minimum Çalışma Sıcaklığı
-30°C
Menşe
Mexico
Ürün Ayrıntıları
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.