Teknik Belgeler
Özellikler
Marka
Sensata / CrydomMaksimum Yük Akımı
4.8 A
Montaj Tipi
DIN Rayı
Kontrol Gerilim Aralığı
18 V ac → 30 V ac, 18 V dc → 30 V dc
Kutupların Sayısı
3
Terminal Tipi
Vida
Yük Gerilimi Aralığı
48 V ac → 510V ac
Seri
DRC
Derinlik
96.02mm
Yükseklik
86.71mm
Uzunluk
45.31mm
Minimum Çalışma Sıcaklığı
-30°C
Maksimum Çalışma Sıcaklığı
+80°C
Menşe
Mexico
Ürün Ayrıntıları
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
4.218,00 TL
4.218,00 TL Each (KDV Hariç)
5.061,60 TL
5.061,60 TL Each KDV Dahil
1
4.218,00 TL
4.218,00 TL Each (KDV Hariç)
5.061,60 TL
5.061,60 TL Each KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
1
Stok bilgileri geçici olarak kullanılamıyor.
Teknik Belgeler
Özellikler
Marka
Sensata / CrydomMaksimum Yük Akımı
4.8 A
Montaj Tipi
DIN Rayı
Kontrol Gerilim Aralığı
18 V ac → 30 V ac, 18 V dc → 30 V dc
Kutupların Sayısı
3
Terminal Tipi
Vida
Yük Gerilimi Aralığı
48 V ac → 510V ac
Seri
DRC
Derinlik
96.02mm
Yükseklik
86.71mm
Uzunluk
45.31mm
Minimum Çalışma Sıcaklığı
-30°C
Maksimum Çalışma Sıcaklığı
+80°C
Menşe
Mexico
Ürün Ayrıntıları
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.