Teknik Belgeler
Özellikler
Marka
Sensirionİzlenen Ortam
Sıvı
Cihaz Tipi
Sıvı Akış Anahtarı
Minimum Akış Hızı
250 (İzopropil Alkol)
Maksimum Akış Hızı
220 (Su) ml/dak, 250 (İzopropil Alkol) mL/dak
Besleme Gerilimi
5 → 12 V
Boru Çapı Aralığı
9,2 mm
Bağlantı Tipi
5 Pimli PCB Başlık
Maksimum Basınç
3bar
Malzeme
Borosilikat Cam (Boru Malzemesi), FEP (Sızdırmazlık), PEEk (Bağlantı Parçası)
Minimum Çalışma Sıcaklığı
+10°C
Maksimum Çalışma Sıcaklığı
+50°C
Akım Değeri
6,8 mA
Menşe
Switzerland
Ürün Ayrıntıları
LG01-2000A Liquid Flow Switch & Bubble Detectors
The LG01-2000A family of liquid flow switches from Sensirion are able to detect liquid flow by millilitres per minute (ml/min). It also provides bubble detection.
When the flow rate is more than the desired flow switch point, the output signal is 5 V. If the flow rate is lower than this point the output signal is 0 V. This is also the case for when air/bubbles are sensed within the sensors flow channel.
This non-invasive liquid flow switch has a straight glass capillary flow path. This also enables chemical resistance and bio-compatibility.
An additional Connectivity Kit can be purchased separately for the LG01 liquid flow switches.
Sensirion Liquid Flow Switches
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
25
P.O.A.
25
Teknik Belgeler
Özellikler
Marka
Sensirionİzlenen Ortam
Sıvı
Cihaz Tipi
Sıvı Akış Anahtarı
Minimum Akış Hızı
250 (İzopropil Alkol)
Maksimum Akış Hızı
220 (Su) ml/dak, 250 (İzopropil Alkol) mL/dak
Besleme Gerilimi
5 → 12 V
Boru Çapı Aralığı
9,2 mm
Bağlantı Tipi
5 Pimli PCB Başlık
Maksimum Basınç
3bar
Malzeme
Borosilikat Cam (Boru Malzemesi), FEP (Sızdırmazlık), PEEk (Bağlantı Parçası)
Minimum Çalışma Sıcaklığı
+10°C
Maksimum Çalışma Sıcaklığı
+50°C
Akım Değeri
6,8 mA
Menşe
Switzerland
Ürün Ayrıntıları
LG01-2000A Liquid Flow Switch & Bubble Detectors
The LG01-2000A family of liquid flow switches from Sensirion are able to detect liquid flow by millilitres per minute (ml/min). It also provides bubble detection.
When the flow rate is more than the desired flow switch point, the output signal is 5 V. If the flow rate is lower than this point the output signal is 0 V. This is also the case for when air/bubbles are sensed within the sensors flow channel.
This non-invasive liquid flow switch has a straight glass capillary flow path. This also enables chemical resistance and bio-compatibility.
An additional Connectivity Kit can be purchased separately for the LG01 liquid flow switches.