Teknik Belgeler
Özellikler
Marka
SMCÜretici Serisi
CP96
Strok
50mm
İşlem
Çift
İç Çap
32mm
Bağlantı Noktası Bağlantısı
G 1/8
Tamponlama Tipi
Hava
Boyutlar
196 x 47 x 47mm
Yükseklik
47mm
Genişlik
47mm
Uzunluk
196mm
Mutlak Maksimum Basınç
1.5MPa
Maksimum Çalışma Basıncı
1 MPa
ISO Standardı
4414
Strok Aralığı Ağırlığı
0,14 kg @ 50 mm strok
Minimum Çalışma Sıcaklığı
-20°C
Ağırlık
1.3kg
Maksimum Çalışma Sıcaklığı
+70°C
Menşe
Czech Republic
Ürün Ayrıntıları
CP96-C Double Acting Cylinder
The SMC CP96-C series double-acting pneumatic cylinders feature both air and bumper cushioning. Using both air and bumper cushioning reduces the length of the cushion stroke reducing cycle time and the noise at the end of the stroke. CP96-C cylinder bodies are grooved on four sides to allow the easy fitting of CNOMO or SMC M9 and A9 position sensors. Sensors can simply be slid into position from either end of the profile actuator body.
CP96 Series
4.006,08 TL
4.006,08 TL Each (KDV Hariç)
4.807,30 TL
4.807,30 TL Each KDV Dahil
1
4.006,08 TL
4.006,08 TL Each (KDV Hariç)
4.807,30 TL
4.807,30 TL Each KDV Dahil
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
SMCÜretici Serisi
CP96
Strok
50mm
İşlem
Çift
İç Çap
32mm
Bağlantı Noktası Bağlantısı
G 1/8
Tamponlama Tipi
Hava
Boyutlar
196 x 47 x 47mm
Yükseklik
47mm
Genişlik
47mm
Uzunluk
196mm
Mutlak Maksimum Basınç
1.5MPa
Maksimum Çalışma Basıncı
1 MPa
ISO Standardı
4414
Strok Aralığı Ağırlığı
0,14 kg @ 50 mm strok
Minimum Çalışma Sıcaklığı
-20°C
Ağırlık
1.3kg
Maksimum Çalışma Sıcaklığı
+70°C
Menşe
Czech Republic
Ürün Ayrıntıları
CP96-C Double Acting Cylinder
The SMC CP96-C series double-acting pneumatic cylinders feature both air and bumper cushioning. Using both air and bumper cushioning reduces the length of the cushion stroke reducing cycle time and the noise at the end of the stroke. CP96-C cylinder bodies are grooved on four sides to allow the easy fitting of CNOMO or SMC M9 and A9 position sensors. Sensors can simply be slid into position from either end of the profile actuator body.