Teknik Belgeler
Özellikler
Marka
SMCKonnektör A
İterek Sokma 6 mm
Konnektör B
İterek Sokma 6 mm
Pnömatik Bağlantı Elemanı Tipi
Perde Geçiş Dişli - Boru Adaptörü
Bağlantı Stili
Dişli - Boru
Üretici Serisi
KQ2
Dişli Malzemesi
Nikel Kaplamalı Pirinç
Gövde Malzemesi
Nikel Kaplamalı Pirinç
Minimum Çalışma Sıcaklığı
-5 °C, 0 °C
Maksimum Çalışma Sıcaklığı
+40 °C, +60 °C
Bitirme
Nikel Kaplamalı
Maksimum Çalışma Basıncı
1 MPa, 3 MPa
Montaj Deliği Çapı
15mm
Boru Bağlantı A - Tip
İterek Sokma
Menşe
Japan
Ürün Ayrıntıları
Bulkhead Union KQ2E
The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.
Bulkhead Adapators
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
10
P.O.A.
10
Teknik Belgeler
Özellikler
Marka
SMCKonnektör A
İterek Sokma 6 mm
Konnektör B
İterek Sokma 6 mm
Pnömatik Bağlantı Elemanı Tipi
Perde Geçiş Dişli - Boru Adaptörü
Bağlantı Stili
Dişli - Boru
Üretici Serisi
KQ2
Dişli Malzemesi
Nikel Kaplamalı Pirinç
Gövde Malzemesi
Nikel Kaplamalı Pirinç
Minimum Çalışma Sıcaklığı
-5 °C, 0 °C
Maksimum Çalışma Sıcaklığı
+40 °C, +60 °C
Bitirme
Nikel Kaplamalı
Maksimum Çalışma Basıncı
1 MPa, 3 MPa
Montaj Deliği Çapı
15mm
Boru Bağlantı A - Tip
İterek Sokma
Menşe
Japan
Ürün Ayrıntıları
Bulkhead Union KQ2E
The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.