Teknik Belgeler
Özellikler
Marka
SollatekGiriş Gerilimi
230V ac
Çıkış Gücü
3680VA
Çıkış Akımı
16A
Çıkışların Sayısı
1
Montaj Tipi
Şasi
Maksimum Çalışma Frekansı
75Hz
Maksimum Sıcaklık
+55°C
Minimum Çalışma Frekansı
45Hz
Minimum Sıcaklık
0°C
Gerilim Koruma Modu
Düşük ve Aşırı Gerilim
Kablo Demeti Yapılandırması
L N E
Koruma Tipi
Aşırı Gerilim ve Düşük Gerilim
Elektrik Fazı
1
Karşılanan Standartlar
ISO9001:2008
Menşe
China
Ürün Ayrıntıları
Sollatek Refrigeration Control
The FreoGuard protect equipment by disconnecting the mains supply when it goes either below or above pre-set acceptable limits. It also has an Intelligent time delay* providing added protection against frequent stops and starts
Transient Voltage Suppressors (Mains, Domestic)
Voltage surges, often referred to as spikes or transient overvoltages are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. For protecting mains power systems, categories A, B and C (mains) devices are used. All mains style products in this section are location category B and exceed the requirements of location category A making them suitable for use in both locations.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
SollatekGiriş Gerilimi
230V ac
Çıkış Gücü
3680VA
Çıkış Akımı
16A
Çıkışların Sayısı
1
Montaj Tipi
Şasi
Maksimum Çalışma Frekansı
75Hz
Maksimum Sıcaklık
+55°C
Minimum Çalışma Frekansı
45Hz
Minimum Sıcaklık
0°C
Gerilim Koruma Modu
Düşük ve Aşırı Gerilim
Kablo Demeti Yapılandırması
L N E
Koruma Tipi
Aşırı Gerilim ve Düşük Gerilim
Elektrik Fazı
1
Karşılanan Standartlar
ISO9001:2008
Menşe
China
Ürün Ayrıntıları
Sollatek Refrigeration Control
The FreoGuard protect equipment by disconnecting the mains supply when it goes either below or above pre-set acceptable limits. It also has an Intelligent time delay* providing added protection against frequent stops and starts
Transient Voltage Suppressors (Mains, Domestic)
Voltage surges, often referred to as spikes or transient overvoltages are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. For protecting mains power systems, categories A, B and C (mains) devices are used. All mains style products in this section are location category B and exceed the requirements of location category A making them suitable for use in both locations.