Sollatek Spike and Surge Protector 13A Spike and Lightning Suppressor, Surge, 2990VA, Floor Standing, Wall Mount
Teknik Belgeler
Özellikler
Marka
SollatekGiriş Gerilimi
230V ac
Çıkış Gücü
2990VA
Çıkış Akımı
13A
Montaj Tipi
Zemin stantı, Duvara Monte
Maksimum Çalışma Frekansı
75Hz
Maksimum Sıcaklık
+55°C
Minimum Çalışma Frekansı
45
Minimum Sıcaklık
0°C
Gerilim Koruma Modu
Diferansiyel
Kablo Demeti Yapılandırması
L N E
Koruma Tipi
Ani Artış ve Yıldırım Baskılama, Aşırı Gerilim
Elektrik Fazı
1
Karşılanan Standartlar
ISO9001:2008
Menşe
China
Ürün Ayrıntıları
Trailing Multiway Socket with Spike & Surge Protection
Transient Voltage Suppressors (Modules,Industrial)
Voltage surges, often referred to as spikes or transient overvoltages are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning activity and can reach up to 6000V, with current surges of up to 3000A. The maximum size of the voltage and current surges depends on the location within the buildings wiring system. BS6651:1999 Annex C which was replaced in August 2008 by BS EN 62305-4:2006 is complemented by BS EN 61643-11/12 and covers location categories and provides guidance on protection of electronic equipment. For mains power systems, Types I, II and III are used. Surge protection devices not designed to fit into these categories may only provide limited protection and the equipment they protect may suffer damage.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
SollatekGiriş Gerilimi
230V ac
Çıkış Gücü
2990VA
Çıkış Akımı
13A
Montaj Tipi
Zemin stantı, Duvara Monte
Maksimum Çalışma Frekansı
75Hz
Maksimum Sıcaklık
+55°C
Minimum Çalışma Frekansı
45
Minimum Sıcaklık
0°C
Gerilim Koruma Modu
Diferansiyel
Kablo Demeti Yapılandırması
L N E
Koruma Tipi
Ani Artış ve Yıldırım Baskılama, Aşırı Gerilim
Elektrik Fazı
1
Karşılanan Standartlar
ISO9001:2008
Menşe
China
Ürün Ayrıntıları
Trailing Multiway Socket with Spike & Surge Protection
Transient Voltage Suppressors (Modules,Industrial)
Voltage surges, often referred to as spikes or transient overvoltages are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning activity and can reach up to 6000V, with current surges of up to 3000A. The maximum size of the voltage and current surges depends on the location within the buildings wiring system. BS6651:1999 Annex C which was replaced in August 2008 by BS EN 62305-4:2006 is complemented by BS EN 61643-11/12 and covers location categories and provides guidance on protection of electronic equipment. For mains power systems, Types I, II and III are used. Surge protection devices not designed to fit into these categories may only provide limited protection and the equipment they protect may suffer damage.