Sprint Electric, DC Motor Kontrol Birimi, 8 A, DIN Rayına Monte, 48 V dc
Teknik Belgeler
Özellikler
Marka
Sprint ElectricÜrün Tipi
DC Motor Kontrol Birimi
Kontrol İşlevi
Speed Controller
Çıkış Gerilimi
48V dc
Besleme Gerilimi
48V dc
Akım Değeri
8 A
Toplam Uzunluk
60mm
Toplam Genişlik
105mm
Toplam Derinlik
120mm
Minimum Çalışma Sıcaklığı
0°C
Maksimum Çalışma Sıcaklığı
40°C
Standartlar/Onaylar
No
Menşe
United Kingdom
Ürün Ayrıntıları
Sprint Electric DC Motor Controller - XLV Range
The XLV range of DC servo controllers are designed for use with permanent magnet brushed DC servo motors rated from 4 to 12 amps, offered in a compact easy to use DIN rail mounting package.
The controllers can be used in either current (torque) or speed control modes. For highly dynamic applications, a shaft-mounted DC tacho-generator is recommended for speed feedback but in less demanding applications, armature voltage feedback (Avf) can be used.
The reference signal for both current and speed control can be either bipolar (10V) or unipolar (0 – 10V). Motor speed can be controlled in both forward and reverse directions. An adjustable current limit and fast-acting current control loop protect the controller and motor from sustained overloads.
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
Sprint ElectricÜrün Tipi
DC Motor Kontrol Birimi
Kontrol İşlevi
Speed Controller
Çıkış Gerilimi
48V dc
Besleme Gerilimi
48V dc
Akım Değeri
8 A
Toplam Uzunluk
60mm
Toplam Genişlik
105mm
Toplam Derinlik
120mm
Minimum Çalışma Sıcaklığı
0°C
Maksimum Çalışma Sıcaklığı
40°C
Standartlar/Onaylar
No
Menşe
United Kingdom
Ürün Ayrıntıları
Sprint Electric DC Motor Controller - XLV Range
The XLV range of DC servo controllers are designed for use with permanent magnet brushed DC servo motors rated from 4 to 12 amps, offered in a compact easy to use DIN rail mounting package.
The controllers can be used in either current (torque) or speed control modes. For highly dynamic applications, a shaft-mounted DC tacho-generator is recommended for speed feedback but in less demanding applications, armature voltage feedback (Avf) can be used.
The reference signal for both current and speed control can be either bipolar (10V) or unipolar (0 – 10V). Motor speed can be controlled in both forward and reverse directions. An adjustable current limit and fast-acting current control loop protect the controller and motor from sustained overloads.