TE Connectivity AMPMODU MTE Serisi IDC Konnektör, 16 Pinli Dişi, Düz, Kablo Ucuna Monte 2,54mm Aralıklı

Teknik Belgeler
Özellikler
Marka
TE ConnectivityKontakların Sayısı
16
Sıraların Sayısı
1
Cinsiyet
Dişi
Hatve
2.54mm
Montaj Tipi
Kablo Montajı
Gövde Yönü
Düz
Sonlandırma Yöntemi
Sıkıştırma
Akım Değeri
3A
Seri
AMPMODU MTE
Minimum Çalışma Sıcaklığı
-65.0°C
Maksimum Çalışma Sıcaklığı
105.0°C
Gerilim Değeri
250.0 V ac
Muhafaza Malzemesi
Termoplastik
Kontak Malzemesi
Fosfor Bronz
Menşe
Mexico
Ürün Ayrıntıları
AMPMODU MTE 2.54mm Unloaded IDC Strip Form Receptacle Housings with Guide Ribs
A range of single row MTE IDC unloaded Receptacle Housings with 2.54mm centres. These MTE IDC Receptacle Housings are made from 94V-0 rated black thermoplastic and have moulded guide ribs to enable ganging with coupling shrouds of other connectors to form larger single or double row latching connectors. For suitable Crimp Receptacle Contacts see stock number 719-0236 typically.
TE Connectivity AMPMODU MTE Interconnection System
AMPMODU MTE 2.54 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTE connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the need for wire stripping saving both time and cost. Using production hand tooling these MTE IDC connectors can be quickly assembled to discrete wire. The AMPMODU MTE connector system consists of single row receptacle housings preloaded with IDC contacts and PCB headers. Coupling shrouds are also available which allow the ganging of connectors to form larger single row or double row connectors
2.305,26 TL
153,684 TL Each (In a Lot of 15) (KDV Hariç)
2.766,31 TL
184,421 TL Each (In a Lot of 15) KDV Dahil
15
2.305,26 TL
153,684 TL Each (In a Lot of 15) (KDV Hariç)
2.766,31 TL
184,421 TL Each (In a Lot of 15) KDV Dahil
15
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
TE ConnectivityKontakların Sayısı
16
Sıraların Sayısı
1
Cinsiyet
Dişi
Hatve
2.54mm
Montaj Tipi
Kablo Montajı
Gövde Yönü
Düz
Sonlandırma Yöntemi
Sıkıştırma
Akım Değeri
3A
Seri
AMPMODU MTE
Minimum Çalışma Sıcaklığı
-65.0°C
Maksimum Çalışma Sıcaklığı
105.0°C
Gerilim Değeri
250.0 V ac
Muhafaza Malzemesi
Termoplastik
Kontak Malzemesi
Fosfor Bronz
Menşe
Mexico
Ürün Ayrıntıları
AMPMODU MTE 2.54mm Unloaded IDC Strip Form Receptacle Housings with Guide Ribs
A range of single row MTE IDC unloaded Receptacle Housings with 2.54mm centres. These MTE IDC Receptacle Housings are made from 94V-0 rated black thermoplastic and have moulded guide ribs to enable ganging with coupling shrouds of other connectors to form larger single or double row latching connectors. For suitable Crimp Receptacle Contacts see stock number 719-0236 typically.
TE Connectivity AMPMODU MTE Interconnection System
AMPMODU MTE 2.54 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTE connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the need for wire stripping saving both time and cost. Using production hand tooling these MTE IDC connectors can be quickly assembled to discrete wire. The AMPMODU MTE connector system consists of single row receptacle housings preloaded with IDC contacts and PCB headers. Coupling shrouds are also available which allow the ganging of connectors to form larger single row or double row connectors