TE Connectivity AMP Serisi PCB Konnektör Kılavuz Pimli, 20 Konumlu Yüksek Gerilim Konnektörleri İle Kullanım
Teknik Belgeler
Özellikler
Marka
TE ConnectivityAksesuar Tipi
Guide Pin
Arka Panel Konnektör Aksesuarı Tipi
Kılavuz Pimi
Şununla Birlikte Kullanım İçin
20 Konumlu Yüksek Gerilim Konnektörleri
Seri
AMP
Ürün Ayrıntıları
TE Connectivity M Series Guide Pins and Sockets
M Series guide pins and sockets made from stainless steel. These guide pins and sockets are used for aligning connector halves during mating. Centre guide pins and sockets are used in housings that have a single mounting hole as well as in the centre hole of housings that have 3 or 4 mounting holes. Corner guide pins and sockets are for use in corner holes of housings that have 2 to 4 mounting holes but cannot be used in centre mounting holes.
TE Connectivity M Series Connector
Standard connectors are furnished as unloaded housings that have Multimate contact cavities for accepting Type II, Type
III+, and subminiature COAXICON crimp-type contacts, as well as Type III+ solder-type and posted contacts. All Multimate contacts are interchangeable in the same housing cavity.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
255,89 TL
Each (Supplied in a Bag) KDV Hariç
307,07 TL
Each (Supplied in a Bag) KDV Dahil
1
255,89 TL
Each (Supplied in a Bag) KDV Hariç
307,07 TL
Each (Supplied in a Bag) KDV Dahil
1
Toptan Satın Al
| Miktar | Birim Fiyat |
|---|---|
| 1 - 24 | 255,89 TL |
| 25 - 74 | 225,79 TL |
| 75 - 199 | 214,61 TL |
| 200 - 399 | 178,49 TL |
| 400+ | 169,89 TL |
Teknik Belgeler
Özellikler
Marka
TE ConnectivityAksesuar Tipi
Guide Pin
Arka Panel Konnektör Aksesuarı Tipi
Kılavuz Pimi
Şununla Birlikte Kullanım İçin
20 Konumlu Yüksek Gerilim Konnektörleri
Seri
AMP
Ürün Ayrıntıları
TE Connectivity M Series Guide Pins and Sockets
M Series guide pins and sockets made from stainless steel. These guide pins and sockets are used for aligning connector halves during mating. Centre guide pins and sockets are used in housings that have a single mounting hole as well as in the centre hole of housings that have 3 or 4 mounting holes. Corner guide pins and sockets are for use in corner holes of housings that have 2 to 4 mounting holes but cannot be used in centre mounting holes.
TE Connectivity M Series Connector
Standard connectors are furnished as unloaded housings that have Multimate contact cavities for accepting Type II, Type
III+, and subminiature COAXICON crimp-type contacts, as well as Type III+ solder-type and posted contacts. All Multimate contacts are interchangeable in the same housing cavity.