Teknik Belgeler
Özellikler
Marka
TE ConnectivityKontakların Sayısı
6
Hatve
2.0mm
Montaj Tipi
Panel Montajı
Gövde Yönü
Düz
Sonlandırma Yöntemi
Sıkıştırma
Akım Değeri
3A
Seri
RITS
Minimum Çalışma Sıcaklığı
-30.0°C
Maksimum Çalışma Sıcaklığı
+75°C
Gerilim Değeri
32 V dc
Kontak Malzemesi
Bakır Alaşım
Ürün Ayrıntıları
TE Connectivity RITS Junction Boxes
RITS (Remote Input/Output Terminal System) junction boxes that enable RITS plug connectors to be mated on both sides.
Part numbers 1473571-x are 2D type panel mounting junction boxes
Part numbers x-1473571-x are 2D type free hanging junction boxes
Part numbers 1473574-3 are 4D type panel mounting junction boxes with 4 connector interfaces which allow 3 outputs by one input. The four interfaces are commoned. Part numbers 5-1473574-x are free hanging versions of these
2.0mm Tyco RITS™ Connector System
The RITS connector (Remote I/O Terminal System) from Tyco Electronics is the new termination standard developed in Japan to solve non-compatibility issue when terminating sensors to Programmable Logic Controllers (PLC). RITS is a quick and highly reliable wire-to-board and wire-to-wire connection system that reduces installation time by up to 80% in Factory Automation applications. Chisel Press Contact termination technology enables larger contact by the chisel shaped contact which pierces into the cable and secures a larger contact area. The retention mechanism retains the cable at higher retention force than IDC connectors. The press function will keep the contact pressure for the life of the connection.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
110,299 TL
Each (In a Bag of 100) KDV Hariç
132,359 TL
Each (In a Bag of 100) KDV Dahil
100
110,299 TL
Each (In a Bag of 100) KDV Hariç
132,359 TL
Each (In a Bag of 100) KDV Dahil
100
Teknik Belgeler
Özellikler
Marka
TE ConnectivityKontakların Sayısı
6
Hatve
2.0mm
Montaj Tipi
Panel Montajı
Gövde Yönü
Düz
Sonlandırma Yöntemi
Sıkıştırma
Akım Değeri
3A
Seri
RITS
Minimum Çalışma Sıcaklığı
-30.0°C
Maksimum Çalışma Sıcaklığı
+75°C
Gerilim Değeri
32 V dc
Kontak Malzemesi
Bakır Alaşım
Ürün Ayrıntıları
TE Connectivity RITS Junction Boxes
RITS (Remote Input/Output Terminal System) junction boxes that enable RITS plug connectors to be mated on both sides.
Part numbers 1473571-x are 2D type panel mounting junction boxes
Part numbers x-1473571-x are 2D type free hanging junction boxes
Part numbers 1473574-3 are 4D type panel mounting junction boxes with 4 connector interfaces which allow 3 outputs by one input. The four interfaces are commoned. Part numbers 5-1473574-x are free hanging versions of these
2.0mm Tyco RITS™ Connector System
The RITS connector (Remote I/O Terminal System) from Tyco Electronics is the new termination standard developed in Japan to solve non-compatibility issue when terminating sensors to Programmable Logic Controllers (PLC). RITS is a quick and highly reliable wire-to-board and wire-to-wire connection system that reduces installation time by up to 80% in Factory Automation applications. Chisel Press Contact termination technology enables larger contact by the chisel shaped contact which pierces into the cable and secures a larger contact area. The retention mechanism retains the cable at higher retention force than IDC connectors. The press function will keep the contact pressure for the life of the connection.