Teknik Belgeler
Özellikler
Marka
TE ConnectivityBirleştirme Tipi
Uç
Ürün Tipi
Bağlantı Yeri Konnektörü
Toplam Uzunluk
31.5mm
Çap
4.6 mm
Minimum Tel Boyutu (AWG)
26 AWG
Yalıtım
Yalıtımlı
Maksimum Tel Boyutu (AWG)
10 AWG
Renk
Mavi
Yalıtım Malzemesi
Naylon
Seri
DuraSeal
Kontak Malzemesi
Bakır
Sonlandırma Tipi
Sıkıştırma
Kontak Kaplaması
Kalay
Standartlar/Onaylar
No
Menşe
Mexico
Ürün Ayrıntıları
Birleştirme
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Stok bilgileri geçici olarak kullanılamıyor.
22.072,00 TL
88,288 TL Each (Supplied in a Bag) (KDV Hariç)
26.486,40 TL
105,946 TL Each (Supplied in a Bag) KDV Dahil
Üretime Uygun Paketleme (Bag)
250

22.072,00 TL
88,288 TL Each (Supplied in a Bag) (KDV Hariç)
26.486,40 TL
105,946 TL Each (Supplied in a Bag) KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
Üretime Uygun Paketleme (Bag)
250

Teknik Belgeler
Özellikler
Marka
TE ConnectivityBirleştirme Tipi
Uç
Ürün Tipi
Bağlantı Yeri Konnektörü
Toplam Uzunluk
31.5mm
Çap
4.6 mm
Minimum Tel Boyutu (AWG)
26 AWG
Yalıtım
Yalıtımlı
Maksimum Tel Boyutu (AWG)
10 AWG
Renk
Mavi
Yalıtım Malzemesi
Naylon
Seri
DuraSeal
Kontak Malzemesi
Bakır
Sonlandırma Tipi
Sıkıştırma
Kontak Kaplaması
Kalay
Standartlar/Onaylar
No
Menşe
Mexico
Ürün Ayrıntıları
Birleştirme
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
