Teknik Belgeler
Özellikler
Marka
TE ConnectivityTip
Receptacle
Minimum Wire Size mm²
0.3mm²
Cinsiyet
Dişi
Maximum Wire Size mm²
0.9mm²
Tırnak Boyutu
6.35 x 0.81mm
Yalıtım
Yalıtımlı
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Sonlandırma Yöntemi
Sıkıştırma
Renk
Kırmızı
Kontak Malzemesi
Pirinç
Kontak Kaplaması
Kalay
Yalıtım Malzemesi
Isıyla Büzülebilen Naylon
Seri
DuraSeal
Menşe
Mexico
Ürün Ayrıntıları
Receptacle
From TE Connectivity, Duraseal heat shrinkable crimp connectors. Non-coated crimp contacts for use with superseal PCB connectors are also included in this range (see stock number 680-2063.)
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
TE ConnectivityTip
Receptacle
Minimum Wire Size mm²
0.3mm²
Cinsiyet
Dişi
Maximum Wire Size mm²
0.9mm²
Tırnak Boyutu
6.35 x 0.81mm
Yalıtım
Yalıtımlı
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Sonlandırma Yöntemi
Sıkıştırma
Renk
Kırmızı
Kontak Malzemesi
Pirinç
Kontak Kaplaması
Kalay
Yalıtım Malzemesi
Isıyla Büzülebilen Naylon
Seri
DuraSeal
Menşe
Mexico
Ürün Ayrıntıları
Receptacle
From TE Connectivity, Duraseal heat shrinkable crimp connectors. Non-coated crimp contacts for use with superseal PCB connectors are also included in this range (see stock number 680-2063.)
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed