TE Connectivity, DuraSeal Insulated Ring Terminal, 6 mm Stud Size 16 AWG 14 AWG Wire Size, Blue
Teknik Belgeler
Özellikler
Marka
TE ConnectivityÜrün Tipi
Halka Terminal
Seri
DuraSeal
Yalıtım
Yalıtımlı
Yalıtım Malzemesi
Naylon
Dış Halka Çapı
11mm
İç Halka Çapı
6.5mm
Minimum Tel Boyutu (AWG)
16 AWG
Maksimum Tel Boyutu (AWG)
14 AWG
Toplam Uzunluk
36.58mm
Saplama Boyutu
6 mm
Renk
Mavi
Kontak Malzemesi
Bakır
Kontak Kaplaması
Kalay
Kalınlık
0.79mm
Standartlar/Onaylar
No
Maksimum Çalışma Sıcaklığı
125°C
Minimum Tel Boyutu (mm²)
1.5mm²
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Tel Boyutu (mm²)
2.5mm²
Menşe
Mexico
Ürün Ayrıntıları
TE Connectivity DuraSeal Ring Terminals
DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
Each (In a Pack of 50) (KDV Hariç)
Standart
50
Teklif İsteyiniz
Each (In a Pack of 50) (KDV Hariç)
Stok bilgileri geçici olarak kullanılamıyor.
Standart
50
Teknik Belgeler
Özellikler
Marka
TE ConnectivityÜrün Tipi
Halka Terminal
Seri
DuraSeal
Yalıtım
Yalıtımlı
Yalıtım Malzemesi
Naylon
Dış Halka Çapı
11mm
İç Halka Çapı
6.5mm
Minimum Tel Boyutu (AWG)
16 AWG
Maksimum Tel Boyutu (AWG)
14 AWG
Toplam Uzunluk
36.58mm
Saplama Boyutu
6 mm
Renk
Mavi
Kontak Malzemesi
Bakır
Kontak Kaplaması
Kalay
Kalınlık
0.79mm
Standartlar/Onaylar
No
Maksimum Çalışma Sıcaklığı
125°C
Minimum Tel Boyutu (mm²)
1.5mm²
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Tel Boyutu (mm²)
2.5mm²
Menşe
Mexico
Ürün Ayrıntıları
TE Connectivity DuraSeal Ring Terminals
DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed