TE Connectivity, DuraSeal Insulated Ring Terminal, 5 mm Stud Size 12 AWG 10 AWG Wire Size, Yellow
Teknik Belgeler
Özellikler
Marka
TE ConnectivityÜrün Tipi
Halka Terminal
Seri
DuraSeal
Yalıtım
Yalıtımlı
Yalıtım Malzemesi
Naylon
Dış Halka Çapı
10mm
İç Halka Çapı
5.3mm
Minimum Tel Boyutu (AWG)
12 AWG
Maksimum Tel Boyutu (AWG)
10 AWG
Toplam Uzunluk
39.98mm
Saplama Boyutu
5 mm
Renk
Sarı
Kontak Malzemesi
Bakır
Kontak Kaplaması
Kalay
Kalınlık
1mm
Standartlar/Onaylar
No
Maksimum Çalışma Sıcaklığı
125°C
Minimum Tel Boyutu (mm²)
3mm²
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Tel Boyutu (mm²)
6mm²
Menşe
Mexico
Ürün Ayrıntıları
TE Connectivity DuraSeal Ring Terminals
DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
Each (In a Pack of 50) (KDV Hariç)
50
Teklif İsteyiniz
Each (In a Pack of 50) (KDV Hariç)
Stok bilgileri geçici olarak kullanılamıyor.
50
Teknik Belgeler
Özellikler
Marka
TE ConnectivityÜrün Tipi
Halka Terminal
Seri
DuraSeal
Yalıtım
Yalıtımlı
Yalıtım Malzemesi
Naylon
Dış Halka Çapı
10mm
İç Halka Çapı
5.3mm
Minimum Tel Boyutu (AWG)
12 AWG
Maksimum Tel Boyutu (AWG)
10 AWG
Toplam Uzunluk
39.98mm
Saplama Boyutu
5 mm
Renk
Sarı
Kontak Malzemesi
Bakır
Kontak Kaplaması
Kalay
Kalınlık
1mm
Standartlar/Onaylar
No
Maksimum Çalışma Sıcaklığı
125°C
Minimum Tel Boyutu (mm²)
3mm²
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Tel Boyutu (mm²)
6mm²
Menşe
Mexico
Ürün Ayrıntıları
TE Connectivity DuraSeal Ring Terminals
DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed