TE Connectivity DuraSeal Serisi Yuvarlak Kablo Ucu, Kırmızı Kalay Kaplı, 22AWG - 18AWG, 0,5mm² - 1mm²

Teknik Belgeler
Özellikler
Marka
TE ConnectivityÜrün Tipi
Halka Terminal
Seri
DuraSeal
Yalıtım
Yalıtımlı
Yalıtım Malzemesi
Naylon
Dış Halka Çapı
18mm
İç Halka Çapı
10.5mm
Minimum Tel Boyutu (AWG)
22 AWG
Maksimum Tel Boyutu (AWG)
18 AWG
Toplam Uzunluk
43.18mm
Saplama Boyutu
M10
Renk
Kırmızı
Kontak Malzemesi
Bakır
Kontak Kaplaması
Kalay
Standartlar/Onaylar
No
Minimum Tel Boyutu (mm²)
0.5mm²
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Tel Boyutu (mm²)
1mm²
Maksimum Çalışma Sıcaklığı
125°C
Menşe
Mexico
Ürün Ayrıntıları
TE Connectivity DuraSeal Ring Terminals
DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Stok bilgileri geçici olarak kullanılamıyor.
113,98 TL
113,98 TL Each (KDV Hariç)
136,78 TL
136,78 TL Each KDV Dahil
Standart
1

113,98 TL
113,98 TL Each (KDV Hariç)
136,78 TL
136,78 TL Each KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
Standart
1

| Miktar | Birim Fiyat |
|---|---|
| 1 - 4 | 113,98 TL |
| 5+ | 106,30 TL |
Teknik Belgeler
Özellikler
Marka
TE ConnectivityÜrün Tipi
Halka Terminal
Seri
DuraSeal
Yalıtım
Yalıtımlı
Yalıtım Malzemesi
Naylon
Dış Halka Çapı
18mm
İç Halka Çapı
10.5mm
Minimum Tel Boyutu (AWG)
22 AWG
Maksimum Tel Boyutu (AWG)
18 AWG
Toplam Uzunluk
43.18mm
Saplama Boyutu
M10
Renk
Kırmızı
Kontak Malzemesi
Bakır
Kontak Kaplaması
Kalay
Standartlar/Onaylar
No
Minimum Tel Boyutu (mm²)
0.5mm²
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Tel Boyutu (mm²)
1mm²
Maksimum Çalışma Sıcaklığı
125°C
Menşe
Mexico
Ürün Ayrıntıları
TE Connectivity DuraSeal Ring Terminals
DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed