TE Connectivity Saydam, Poliolefin Lehimli Makaron, 1 → 3mm, 24,5mm Uzunluğunda
Teknik Belgeler
Özellikler
Marka
TE ConnectivityMinimum Kablo Çapı
1mm
Maksimum Kablo Çapı
3mm
Manşon Uzunluğu
24.5mm
Malzeme
Poliolefin
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
+125°C
Miktar
1
Renk
Saydam
Büzülme Sıcaklığı
+85°C
Karşılanan Standartlar
ANSI J-STD-004, ANSI J-STD-006
Seri
B-155
Menşe
Mexico
Ürün Ayrıntıları
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
3.280,70 TL
32,807 TL Each (In a Pack of 100) (KDV Hariç)
3.936,84 TL
39,368 TL Each (In a Pack of 100) KDV Dahil
100
3.280,70 TL
32,807 TL Each (In a Pack of 100) (KDV Hariç)
3.936,84 TL
39,368 TL Each (In a Pack of 100) KDV Dahil
100
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
| Miktar | Birim Fiyat | Per Paket |
|---|---|---|
| 100 - 1400 | 32,807 TL | 3.280,70 TL |
| 1500 - 4900 | 31,164 TL | 3.116,40 TL |
| 5000+ | 29,521 TL | 2.952,10 TL |
Teknik Belgeler
Özellikler
Marka
TE ConnectivityMinimum Kablo Çapı
1mm
Maksimum Kablo Çapı
3mm
Manşon Uzunluğu
24.5mm
Malzeme
Poliolefin
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
+125°C
Miktar
1
Renk
Saydam
Büzülme Sıcaklığı
+85°C
Karşılanan Standartlar
ANSI J-STD-004, ANSI J-STD-006
Seri
B-155
Menşe
Mexico
Ürün Ayrıntıları
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.