TE Connectivity Saydam, Poliolefin Lehimli Makaron, 2,8 → 7,3mm, 32,5mm Uzunluğunda
Teknik Belgeler
Özellikler
Marka
TE ConnectivityÜrün Tipi
Solder Sleeve
Manşon Uzunluğu
32.5mm
Malzeme
Poliolefin
Dielektrik Dayanımı
1kV
Minimum Kablo Çapı
2.8mm
Maksimum Kablo Çapı
7.3mm
Renk
Saydam
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
125°C
Standartlar/Onaylar
ANSI J-STD-004, ANSI J-STD-006
Büzülme Sıcaklığı
85°C
Seri
B-155
Menşe
Mexico
Ürün Ayrıntıları
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Stok bilgileri geçici olarak kullanılamıyor.
8.072,40 TL
80,724 TL Each (In a Pack of 100) (KDV Hariç)
9.686,88 TL
96,869 TL Each (In a Pack of 100) KDV Dahil
100
8.072,40 TL
80,724 TL Each (In a Pack of 100) (KDV Hariç)
9.686,88 TL
96,869 TL Each (In a Pack of 100) KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
100
| Miktar | Birim Fiyat | Per Paket |
|---|---|---|
| 100 - 1400 | 80,724 TL | 8.072,40 TL |
| 1500 - 4900 | 76,694 TL | 7.669,40 TL |
| 5000+ | 72,664 TL | 7.266,40 TL |
Teknik Belgeler
Özellikler
Marka
TE ConnectivityÜrün Tipi
Solder Sleeve
Manşon Uzunluğu
32.5mm
Malzeme
Poliolefin
Dielektrik Dayanımı
1kV
Minimum Kablo Çapı
2.8mm
Maksimum Kablo Çapı
7.3mm
Renk
Saydam
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
125°C
Standartlar/Onaylar
ANSI J-STD-004, ANSI J-STD-006
Büzülme Sıcaklığı
85°C
Seri
B-155
Menşe
Mexico
Ürün Ayrıntıları
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.