TE Connectivity Transparent Polyolefin Solder Sleeve 16mm Length 2 mm Cable Diameter 0.9 mm Cable Diameter
Teknik Belgeler
Özellikler
Marka
TE ConnectivityÜrün Tipi
Solder Sleeve
Alt Tip
Terminator
Manşon Uzunluğu
16mm
Malzeme
Poliolefin
Dielektrik Dayanımı
1kV
Minimum Kablo Çapı
0.9mm
Maksimum Kablo Çapı
2mm
Renk
Saydam
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
125°C
Standartlar/Onaylar
ANSI J-STD-004, ANSI J-STD-006
Büzülme Sıcaklığı
85°C
Seri
B-155
Menşe
Mexico
Ürün Ayrıntıları
Wire Termination: Pin, Post & Tab
Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several pins to be terminated it is possible to position and recover an entire row of solder sleeves in one go.,Recommended for use with most connector pins/posts/tabs applications such as LED's, switches, multiple row/pin connectors.
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
TE ConnectivityÜrün Tipi
Solder Sleeve
Alt Tip
Terminator
Manşon Uzunluğu
16mm
Malzeme
Poliolefin
Dielektrik Dayanımı
1kV
Minimum Kablo Çapı
0.9mm
Maksimum Kablo Çapı
2mm
Renk
Saydam
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
125°C
Standartlar/Onaylar
ANSI J-STD-004, ANSI J-STD-006
Büzülme Sıcaklığı
85°C
Seri
B-155
Menşe
Mexico
Ürün Ayrıntıları
Wire Termination: Pin, Post & Tab
Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several pins to be terminated it is possible to position and recover an entire row of solder sleeves in one go.,Recommended for use with most connector pins/posts/tabs applications such as LED's, switches, multiple row/pin connectors.