TE Connectivity, Poliolefin Lehimli Makaron, 1,3 → 2,7mm, 42mm Uzunluğunda

RS Stok Numarası: 136-2080Marka: TE ConnectivityÜretici Parça Numarası: B-155-9002
brand-logo

Teknik Belgeler

Özellikler

Ürün Tipi

Solder Sleeve

Alt Tip

Terminator

Manşon Uzunluğu

42mm

Malzeme

Poliolefin

Dielektrik Dayanımı

2kV

Minimum Kablo Çapı

1.3mm

Maksimum Kablo Çapı

2.7mm

Renk

Kırmızı

Minimum Çalışma Sıcaklığı

-55°C

Maksimum Çalışma Sıcaklığı

125°C

Standartlar/Onaylar

ANSI J-STD-004, ANSI J-STD-006

Büzülme Sıcaklığı

85°C

Seri

B-155

Menşe

Mexico

Ürün Ayrıntıları

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Stok bilgileri geçici olarak kullanılamıyor.

4.896,45 TL

4.896,45 TL 1 Box of 100 (KDV Hariç)

5.875,74 TL

5.875,74 TL 1 Box of 100 KDV Dahil

TE Connectivity, Poliolefin Lehimli Makaron, 1,3 → 2,7mm, 42mm Uzunluğunda

4.896,45 TL

4.896,45 TL 1 Box of 100 (KDV Hariç)

5.875,74 TL

5.875,74 TL 1 Box of 100 KDV Dahil

TE Connectivity, Poliolefin Lehimli Makaron, 1,3 → 2,7mm, 42mm Uzunluğunda

Stok bilgileri geçici olarak kullanılamıyor.

Teknik Belgeler

Özellikler

Ürün Tipi

Solder Sleeve

Alt Tip

Terminator

Manşon Uzunluğu

42mm

Malzeme

Poliolefin

Dielektrik Dayanımı

2kV

Minimum Kablo Çapı

1.3mm

Maksimum Kablo Çapı

2.7mm

Renk

Kırmızı

Minimum Çalışma Sıcaklığı

-55°C

Maksimum Çalışma Sıcaklığı

125°C

Standartlar/Onaylar

ANSI J-STD-004, ANSI J-STD-006

Büzülme Sıcaklığı

85°C

Seri

B-155

Menşe

Mexico

Ürün Ayrıntıları

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.