TE Connectivity Mavi, PVDF Lehimli Makaron, 1.9 → 4.5mm, 36.1mm Uzunluğunda

RS Stok Numarası: 136-2095Marka: TE ConnectivityÜretici Parça Numarası: D-110-0181
brand-logo
View all in Lehimli Daralan Makaronlar

Teknik Belgeler

Özellikler

Marka

TE Connectivity

Minimum Kablo Çapı

1.9mm

Maksimum Kablo Çapı

5mm

Manşon Uzunluğu

36.1mm

Malzeme

PVDF

Miktar

500

Renk

Mavi

Karşılanan Standartlar

ANSI J-STD-004, ANSI J-STD-006

Seri

D-110

Menşe

Mexico

Ürün Ayrıntıları

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Stok bilgileri geçici olarak kullanılamıyor.

Ayrıntılı bilgi için iletşime geçiniz

Stok bilgileri geçici olarak kullanılamıyor.

P.O.A.

TE Connectivity Mavi, PVDF Lehimli Makaron, 1.9 → 4.5mm, 36.1mm Uzunluğunda

1

Katlarında sipariş edilebilir 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

TE Connectivity Mavi, PVDF Lehimli Makaron, 1.9 → 4.5mm, 36.1mm Uzunluğunda
Stok bilgileri geçici olarak kullanılamıyor.

1

Katlarında sipariş edilebilir 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Teknik Belgeler

Özellikler

Marka

TE Connectivity

Minimum Kablo Çapı

1.9mm

Maksimum Kablo Çapı

5mm

Manşon Uzunluğu

36.1mm

Malzeme

PVDF

Miktar

500

Renk

Mavi

Karşılanan Standartlar

ANSI J-STD-004, ANSI J-STD-006

Seri

D-110

Menşe

Mexico

Ürün Ayrıntıları

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.