TE Connectivity Mavi, Poliolefin Lehimli Makaron, 0,76 → 1,52mm, 18.54mm Uzunluğunda
Teknik Belgeler
Özellikler
Marka
TE ConnectivityÜrün Tipi
Solder Sleeve
Alt Tip
Terminator
Manşon Uzunluğu
18.54mm
Malzeme
Poliolefin
Dielektrik Dayanımı
2kV
Gerilim
600 V
Minimum Kablo Çapı
0.76mm
Maksimum Kablo Çapı
1.52mm
Renk
Mavi
Minimum Çalışma Sıcaklığı
-5°C
Maksimum Çalışma Sıcaklığı
125°C
Standartlar/Onaylar
ANSI J-STD-004, ANSI J-STD-006
Büzülme Sıcaklığı
85°C
Seri
D-110
Menşe
Mexico
Ürün Ayrıntıları
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Stok bilgileri geçici olarak kullanılamıyor.
55.676,00 TL
111,352 TL Each (In a Pack of 500) (KDV Hariç)
66.811,20 TL
133,622 TL Each (In a Pack of 500) KDV Dahil
500
55.676,00 TL
111,352 TL Each (In a Pack of 500) (KDV Hariç)
66.811,20 TL
133,622 TL Each (In a Pack of 500) KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
500
| Miktar | Birim Fiyat | Per Paket |
|---|---|---|
| 500 - 7000 | 111,352 TL | 55.676,00 TL |
| 7500 - 24500 | 105,772 TL | 52.886,00 TL |
| 25000+ | 100,192 TL | 50.096,00 TL |
Teknik Belgeler
Özellikler
Marka
TE ConnectivityÜrün Tipi
Solder Sleeve
Alt Tip
Terminator
Manşon Uzunluğu
18.54mm
Malzeme
Poliolefin
Dielektrik Dayanımı
2kV
Gerilim
600 V
Minimum Kablo Çapı
0.76mm
Maksimum Kablo Çapı
1.52mm
Renk
Mavi
Minimum Çalışma Sıcaklığı
-5°C
Maksimum Çalışma Sıcaklığı
125°C
Standartlar/Onaylar
ANSI J-STD-004, ANSI J-STD-006
Büzülme Sıcaklığı
85°C
Seri
D-110
Menşe
Mexico
Ürün Ayrıntıları
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.