TE Connectivity Mavi, Poliolefin Lehimli Makaron, 0,76 → 1,52mm, 18.54mm Uzunluğunda
Teknik Belgeler
Özellikler
Marka
TE ConnectivityMinimum Kablo Çapı
0.76mm
Maksimum Kablo Çapı
1.52mm
Manşon Uzunluğu
18.54mm
Malzeme
Poliolefin
Gerilim Değeri
600 V
Minimum Çalışma Sıcaklığı
-5°C
Maksimum Çalışma Sıcaklığı
+125°C
Renk
Mavi
Seri
D-110
Karşılanan Standartlar
ANSI J-STD-004, ANSI J-STD-006
Menşe
Mexico
Ürün Ayrıntıları
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
51.186,00 TL
102,372 TL Each (In a Pack of 500) (KDV Hariç)
61.423,20 TL
122,846 TL Each (In a Pack of 500) KDV Dahil
500
51.186,00 TL
102,372 TL Each (In a Pack of 500) (KDV Hariç)
61.423,20 TL
122,846 TL Each (In a Pack of 500) KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
500
Stok bilgileri geçici olarak kullanılamıyor.
| Miktar | Birim Fiyat | Per Paket |
|---|---|---|
| 500 - 7000 | 102,372 TL | 51.186,00 TL |
| 7500 - 24500 | 97,242 TL | 48.621,00 TL |
| 25000+ | 92,112 TL | 46.056,00 TL |
Teknik Belgeler
Özellikler
Marka
TE ConnectivityMinimum Kablo Çapı
0.76mm
Maksimum Kablo Çapı
1.52mm
Manşon Uzunluğu
18.54mm
Malzeme
Poliolefin
Gerilim Değeri
600 V
Minimum Çalışma Sıcaklığı
-5°C
Maksimum Çalışma Sıcaklığı
+125°C
Renk
Mavi
Seri
D-110
Karşılanan Standartlar
ANSI J-STD-004, ANSI J-STD-006
Menşe
Mexico
Ürün Ayrıntıları
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.