Teknik Belgeler
Özellikler
Marka
TE ConnectivityÜrün Tipi
Çatal Tipi Konnektör
Sonlandırma Tipi
Sıkıştırma
Cinsiyet
Dişi
Tırnak Genişliği
6.35mm
Tırnak Kalınlığı
0.8mm
Tırnak Boyutu
6.35 x 0.8 mm
Yalıtım
Yalıtımlı
Minimum Tel Boyutu (mm²)
1.5mm²
Minimum Tel Boyutu (AWG)
16 AWG
Maksimum Tel Boyutu (mm²)
2.5mm²
Maksimum Tel Boyutu (AWG)
14 AWG
Renk
Mavi
Yön
Düz
Yalıtım Malzemesi
Naylon
Standartlar/Onaylar
No
Seri
DuraSeal
Menşe
Mexico
Ürün Ayrıntıları
Receptacle
From TE Connectivity, Duraseal heat shrinkable crimp connectors. Non-coated crimp contacts for use with superseal PCB connectors are also included in this range (see stock number 680-2063.)
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Stok bilgileri geçici olarak kullanılamıyor.
2.681,60 TL
53,632 TL Each (In a Pack of 50) (KDV Hariç)
3.217,92 TL
64,358 TL Each (In a Pack of 50) KDV Dahil
50

2.681,60 TL
53,632 TL Each (In a Pack of 50) (KDV Hariç)
3.217,92 TL
64,358 TL Each (In a Pack of 50) KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
50

Teknik Belgeler
Özellikler
Marka
TE ConnectivityÜrün Tipi
Çatal Tipi Konnektör
Sonlandırma Tipi
Sıkıştırma
Cinsiyet
Dişi
Tırnak Genişliği
6.35mm
Tırnak Kalınlığı
0.8mm
Tırnak Boyutu
6.35 x 0.8 mm
Yalıtım
Yalıtımlı
Minimum Tel Boyutu (mm²)
1.5mm²
Minimum Tel Boyutu (AWG)
16 AWG
Maksimum Tel Boyutu (mm²)
2.5mm²
Maksimum Tel Boyutu (AWG)
14 AWG
Renk
Mavi
Yön
Düz
Yalıtım Malzemesi
Naylon
Standartlar/Onaylar
No
Seri
DuraSeal
Menşe
Mexico
Ürün Ayrıntıları
Receptacle
From TE Connectivity, Duraseal heat shrinkable crimp connectors. Non-coated crimp contacts for use with superseal PCB connectors are also included in this range (see stock number 680-2063.)
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
