TE Connectivity DuraSeal Ek Muf, Sarı, İzoleli, Uç, Kalay Kaplı, Tel Boyu: 12 → 10 AWG
Teknik Belgeler
Özellikler
Marka
TE ConnectivityBirleştirme Tipi
Uç
Tel Boyutu
12 → 10 AWG
Toplam Uzunluk
43mm
Çap
6.5mm
Yalıtım
Yalıtımlı
Renk
Sarı
Seri
DuraSeal
Kontak Malzemesi
Bakır
Kontak Kaplaması
Kalay
Kalınlık
3mm
Distrelec Product Id
30401356
Menşe
Mexico
Ürün Ayrıntıları
Birleştirme
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
2.151,75 TL
43,035 TL Each (In a Pack of 50) (KDV Hariç)
2.582,10 TL
51,642 TL Each (In a Pack of 50) KDV Dahil
50
2.151,75 TL
43,035 TL Each (In a Pack of 50) (KDV Hariç)
2.582,10 TL
51,642 TL Each (In a Pack of 50) KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
50
Stok bilgileri geçici olarak kullanılamıyor.
| Miktar | Birim Fiyat | Per Paket |
|---|---|---|
| 50 - 200 | 43,035 TL | 2.151,75 TL |
| 250 - 1200 | 39,615 TL | 1.980,75 TL |
| 1250 - 2450 | 35,283 TL | 1.764,15 TL |
| 2500 - 4950 | 32,262 TL | 1.613,10 TL |
| 5000+ | 30,096 TL | 1.504,80 TL |
Teknik Belgeler
Özellikler
Marka
TE ConnectivityBirleştirme Tipi
Uç
Tel Boyutu
12 → 10 AWG
Toplam Uzunluk
43mm
Çap
6.5mm
Yalıtım
Yalıtımlı
Renk
Sarı
Seri
DuraSeal
Kontak Malzemesi
Bakır
Kontak Kaplaması
Kalay
Kalınlık
3mm
Distrelec Product Id
30401356
Menşe
Mexico
Ürün Ayrıntıları
Birleştirme
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed