Teknik Belgeler
Özellikler
Marka
TE ConnectivityBirleştirme Tipi
Uç
Tel Boyutu
22 → 18 AWG
Toplam Uzunluk
36mm
Minimum Wire Size AWG
18AWG
Çap
3.7mm
Minimum Tel Boyutu (AWG)
18Amerikan Kablo Ölçüsü
Yalıtım
Yalıtımlı
Maximum Wire Size AWG
22AWG
Maksimum Tel Boyutu (AWG)
22Amerikan Kablo Ölçüsü
Renk
Kırmızı
Seri
DuraSeal
Kontak Malzemesi
Bakır
Kontak Kaplaması
Kalay
Menşe
Mexico
Ürün Ayrıntıları
Birleştirme
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
16,34 TL
Each (In a Pack of 50) KDV Hariç
19,608 TL
Each (In a Pack of 50) KDV Dahil
50
16,34 TL
Each (In a Pack of 50) KDV Hariç
19,608 TL
Each (In a Pack of 50) KDV Dahil
50
Toptan Satın Al
Miktar | Birim Fiyat | Per Paket |
---|---|---|
50 - 200 | 16,34 TL | 817,00 TL |
250 - 1200 | 15,007 TL | 750,35 TL |
1250 - 2450 | 13,373 TL | 668,65 TL |
2500 - 4950 | 12,255 TL | 612,75 TL |
5000+ | 11,438 TL | 571,90 TL |
Teknik Belgeler
Özellikler
Marka
TE ConnectivityBirleştirme Tipi
Uç
Tel Boyutu
22 → 18 AWG
Toplam Uzunluk
36mm
Minimum Wire Size AWG
18AWG
Çap
3.7mm
Minimum Tel Boyutu (AWG)
18Amerikan Kablo Ölçüsü
Yalıtım
Yalıtımlı
Maximum Wire Size AWG
22AWG
Maksimum Tel Boyutu (AWG)
22Amerikan Kablo Ölçüsü
Renk
Kırmızı
Seri
DuraSeal
Kontak Malzemesi
Bakır
Kontak Kaplaması
Kalay
Menşe
Mexico
Ürün Ayrıntıları
Birleştirme
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed