Teknik Belgeler
Özellikler
Aktüatör Tipi
Kablo Çektirme
Normal Durum Yapılandırması
NO/NC
IP Değeri
IP66
Maksimum Akım
10A
Maksimum AC Gerilim
240V
Seri
OsiSense XC
Uzunluk
62mm
Minimum Çalışma Sıcaklığı
-20°C
Derinlik
30mm
Genişlik
60mm
Maksimum Çalışma Sıcaklığı
+80°C
Mekanik Ömür
30 x 10000000Cycles
Daha İyi Dünya Doğrulaması
Green Premium
Menşe
France
Ürün Ayrıntıları
Telemecanique Electric Eye-let Pull Limit Switch XY2-CD
A position switch with cable control is an ideal form of emergency stop within large environments such as factories and production lines. Telemecanique Sensors presents the XY2CD, this position sensor is controllable from anywhere within a work area. Also known as a cable pull, rope pull or cord pull, cable or rope can be attached to the eye-let actuator, once the cable is pulled, the limit switch is triggered. This type of switch allows all users in an industrial or production setting access to an emergency stop no matter where they are situated.
The WY2CD can be connected via screwed terminal strips and also connected to a sensor via 3 PG11 sealing gland inputs. Featuring a blue unit, with plastic head has a body made from Zamak offering high impact and corrosion resistance whilst being heavy-duty. With a life cycle of up to 1500000 cycles, this switch is durable, rugged and reliable.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Aktüatör Tipi
Kablo Çektirme
Normal Durum Yapılandırması
NO/NC
IP Değeri
IP66
Maksimum Akım
10A
Maksimum AC Gerilim
240V
Seri
OsiSense XC
Uzunluk
62mm
Minimum Çalışma Sıcaklığı
-20°C
Derinlik
30mm
Genişlik
60mm
Maksimum Çalışma Sıcaklığı
+80°C
Mekanik Ömür
30 x 10000000Cycles
Daha İyi Dünya Doğrulaması
Green Premium
Menşe
France
Ürün Ayrıntıları
Telemecanique Electric Eye-let Pull Limit Switch XY2-CD
A position switch with cable control is an ideal form of emergency stop within large environments such as factories and production lines. Telemecanique Sensors presents the XY2CD, this position sensor is controllable from anywhere within a work area. Also known as a cable pull, rope pull or cord pull, cable or rope can be attached to the eye-let actuator, once the cable is pulled, the limit switch is triggered. This type of switch allows all users in an industrial or production setting access to an emergency stop no matter where they are situated.
The WY2CD can be connected via screwed terminal strips and also connected to a sensor via 3 PG11 sealing gland inputs. Featuring a blue unit, with plastic head has a body made from Zamak offering high impact and corrosion resistance whilst being heavy-duty. With a life cycle of up to 1500000 cycles, this switch is durable, rugged and reliable.