Texas Instruments TUSB4041IPAP USB Hub Entegresi, 4-Kanallı, 480Mbit/sn, USB 2.0, 64-Pinli HTQFP
Teknik Belgeler
Özellikler
Marka
Texas InstrumentsAlıcı-Vericilerin Sayısı
4
Veri Hızı
480Mbit/sn
Desteklenen Protokoller
USB 2.0
Güç Beslemesi Tipi
İkili
ESD Koruması
Yes
Tipik Çift Besleme Gerilimi
1.1 V, 3.3 V
Montaj Tipi
Yüzeye Monte
Paket Tipi
HTQFP
Pim Sayısı
64
Boyutlar
10.2 x 10.2 x 1.05mm
Yükseklik
1.05mm
Uzunluk
10.2mm
Maksimum Çalışma Sıcaklığı
-40 → +85°C
Genişlik
10.2mm
Minimum Çalışma Sıcaklığı
-40 → +85°C
Ürün Ayrıntıları
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.
USB (Universal Serial Bus), Texas Instruments
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
Texas InstrumentsAlıcı-Vericilerin Sayısı
4
Veri Hızı
480Mbit/sn
Desteklenen Protokoller
USB 2.0
Güç Beslemesi Tipi
İkili
ESD Koruması
Yes
Tipik Çift Besleme Gerilimi
1.1 V, 3.3 V
Montaj Tipi
Yüzeye Monte
Paket Tipi
HTQFP
Pim Sayısı
64
Boyutlar
10.2 x 10.2 x 1.05mm
Yükseklik
1.05mm
Uzunluk
10.2mm
Maksimum Çalışma Sıcaklığı
-40 → +85°C
Genişlik
10.2mm
Minimum Çalışma Sıcaklığı
-40 → +85°C
Ürün Ayrıntıları
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.