Teknik Belgeler
Özellikler
Marka
United AutomationAksesuar Tipi
PIR Denetleyicisi
Şununla Birlikte Kullanım İçin
IR Heaters
Model Numarası
Infresco-P 6kW
Menşe
United Kingdom
Ürün Ayrıntıları
Infresco 6KW PIR Soft-Start Controller P-6kW
The infresco-P 6kW is part of a family of controllers that is designed to provide energy saving when used with Quartz Infrared Halogen Lamps. The unit has a built in PIR sensor allowing the lamps to automatically switch on only when people are present. In addition to the PIR, a temperature sensor monitors the outside temperature and inhibits the lamps when the temperature exceeds a pre-determined set point of between 1 and 40 degrees Celsius. Additional features include a walk test facility and a sensitivity control which were not fitted to the 4kW version.
The microcontroller-based system incorporates Zero-Voltage switching and a Soft-Start function to eliminate the lamps initial high inrush current – potentially increasing lamp life by as much as 30%. The lamps are switched on for a fixed time period of 5 minutes. This period is reset each time the PIR detects any further movement. Once installed is relatively maintenance free.
Power Controller Accessories
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
7.531,88 TL
Each KDV Hariç
9.038,26 TL
Each KDV Dahil
1
7.531,88 TL
Each KDV Hariç
9.038,26 TL
Each KDV Dahil
1
Toptan Satın Al
Miktar | Birim Fiyat |
---|---|
1 - 4 | 7.531,88 TL |
5 - 9 | 7.398,15 TL |
10 - 24 | 7.098,87 TL |
25+ | 6.526,54 TL |
Teknik Belgeler
Özellikler
Marka
United AutomationAksesuar Tipi
PIR Denetleyicisi
Şununla Birlikte Kullanım İçin
IR Heaters
Model Numarası
Infresco-P 6kW
Menşe
United Kingdom
Ürün Ayrıntıları
Infresco 6KW PIR Soft-Start Controller P-6kW
The infresco-P 6kW is part of a family of controllers that is designed to provide energy saving when used with Quartz Infrared Halogen Lamps. The unit has a built in PIR sensor allowing the lamps to automatically switch on only when people are present. In addition to the PIR, a temperature sensor monitors the outside temperature and inhibits the lamps when the temperature exceeds a pre-determined set point of between 1 and 40 degrees Celsius. Additional features include a walk test facility and a sensitivity control which were not fitted to the 4kW version.
The microcontroller-based system incorporates Zero-Voltage switching and a Soft-Start function to eliminate the lamps initial high inrush current – potentially increasing lamp life by as much as 30%. The lamps are switched on for a fixed time period of 5 minutes. This period is reset each time the PIR detects any further movement. Once installed is relatively maintenance free.