İğne Ayaklı Gösterge Işığı, 14 V, 80 mA, 1000 Saat
Teknik Belgeler
Özellikler
Marka
VCCGerilim Değeri
14 V
Lamba Tabanı
Çift Pimli
Akım Değeri
80 mA
Çap
4.3mm
Lamba Boyutu
T-1 1/4
Uzunluk
15,2 mm
Aydınlatma Gücü
0,5 mscp
Ömür Saati
1000sa
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
T-1 (4mm) Bi-Pin
A range of T-1 1/4 (4mm) Bi-pin filament indicators, specifically intended for illumination in confined spaces, e.g. meters, switches, etc.
Wire-Ended & Bi-Pin
Filament lamps will perform to specification and give optimum life when:,a) They are powered at the rated voltage from a stabilised 50Hz ac supply,b) Ambient temperature is in the range 20 to 25°C,c) No mechanical vibration is present.,Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA). Operation from a dc supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care therefore should be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Teklif İsteyiniz
Each (In a Pack of 100) (KDV Hariç)
100
Teklif İsteyiniz
Each (In a Pack of 100) (KDV Hariç)
Stok bilgileri geçici olarak kullanılamıyor.
100
Stok bilgileri geçici olarak kullanılamıyor.
Teknik Belgeler
Özellikler
Marka
VCCGerilim Değeri
14 V
Lamba Tabanı
Çift Pimli
Akım Değeri
80 mA
Çap
4.3mm
Lamba Boyutu
T-1 1/4
Uzunluk
15,2 mm
Aydınlatma Gücü
0,5 mscp
Ömür Saati
1000sa
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
T-1 (4mm) Bi-Pin
A range of T-1 1/4 (4mm) Bi-pin filament indicators, specifically intended for illumination in confined spaces, e.g. meters, switches, etc.
Wire-Ended & Bi-Pin
Filament lamps will perform to specification and give optimum life when:,a) They are powered at the rated voltage from a stabilised 50Hz ac supply,b) Ambient temperature is in the range 20 to 25°C,c) No mechanical vibration is present.,Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA). Operation from a dc supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care therefore should be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.