Erem Uç Tel Keski, Kesme Kapasitesi: 1,3mm, Uzunluk: 115mm
Teknik Belgeler
Özellikler
Marka
Weller EremKesici Alet Tipi
Eğimli Kesiciler
Malzeme Kesimi
Copper Wire, Hard Wire
Toplam Uzunluk
115 mm
ESD Güvenli
Yes
Maksimum Kesme Kapasitesi
1.3mm
Kesme Tipi
Gömme
Ürün Ayrıntıları
Angled Head Small Cable Cutters
Small angle cable cutters which are suitable for working on printed-circuit boards, component connections and can be used in both 90° and 180° applications. These cutters have a full flush cut and can be used on medium hard wire, stainless steel wire, material 1.4301. tensile strength 800 MPa. As well as soft wire, copper, aluminium, tensile strength 250 MPa.
These electronics cutters are manufactured from high quality machined tool steel. The cutters feature a built-in internal stop and integral return spring to prevent blade overlapping and reduce operator fatigue. All cutters are supplied with soft grip foam rubber grips.
Versions available are:
239-4010 - Model 582E is designed for PCB component lead cutting, NATO and UK MOD approved 5110-99-256 52 58, 45 degree angle
239-4026 - Model 593AE is designed for rear cutting of DIP leads and dense PCBs, 30 degree angle
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
Weller EremKesici Alet Tipi
Eğimli Kesiciler
Malzeme Kesimi
Copper Wire, Hard Wire
Toplam Uzunluk
115 mm
ESD Güvenli
Yes
Maksimum Kesme Kapasitesi
1.3mm
Kesme Tipi
Gömme
Ürün Ayrıntıları
Angled Head Small Cable Cutters
Small angle cable cutters which are suitable for working on printed-circuit boards, component connections and can be used in both 90° and 180° applications. These cutters have a full flush cut and can be used on medium hard wire, stainless steel wire, material 1.4301. tensile strength 800 MPa. As well as soft wire, copper, aluminium, tensile strength 250 MPa.
These electronics cutters are manufactured from high quality machined tool steel. The cutters feature a built-in internal stop and integral return spring to prevent blade overlapping and reduce operator fatigue. All cutters are supplied with soft grip foam rubber grips.
Versions available are:
239-4010 - Model 582E is designed for PCB component lead cutting, NATO and UK MOD approved 5110-99-256 52 58, 45 degree angle
239-4026 - Model 593AE is designed for rear cutting of DIP leads and dense PCBs, 30 degree angle