Teknik Belgeler
Özellikler
Marka
ZirconMetal Algılama Derinliği
300mm
Saplama Algılama Derinliği
115 → 300mm
Kablo Algılama Derinliği
115mm
Pil Tipi
LR03 AAA
Güç Kaynağı
Batarya
Boyutlar
44 x 57 x 241mm
Ağırlık
235 (Without Battery)g
Yükseklik
241mm
Uzunluk
44mm
Maksimum Çalışma Sıcaklığı
+41°C
Minimum Çalışma Sıcaklığı
-7°C
Genişlik
57mm
Model Number p
Z67597
PRICED TO CLEAR
Yes
Ürün Ayrıntıları
Zircon ExitPoint XL300
The Exitpoint XL300 from Zircon is designed to accurately detect exit points before drilling and coring.
The XL300 is the easiest way to locate a precise spot without the need of measuring before starting work on your project.
It scans through most types of non-magnetic materials such as wood, drywall, gypsum panels, bricks and concrete up to 11.81 in (300 mm) thick.
Affix the transmitter magnet on the target spot, then scan the area of the other side of the wall. The receiver indicates it is near the centre of the transmitter by changing colour to red.
This simple yet effective tool improves efficiency and saves money by reducing guesswork, reworking, unnecessary holes and even damaged drill bits.
A must have for cable and wiring installations, concrete scanning or anytime through-hole drilling is required.
Supplied with
Receiver, small and large transmitter magnets, reusable adhesive discs, AAA batteries, quick reference guide and protective carrying case.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
5.021,93 TL
Each KDV Hariç
6.026,32 TL
Each KDV Dahil
1
5.021,93 TL
Each KDV Hariç
6.026,32 TL
Each KDV Dahil
1
Teknik Belgeler
Özellikler
Marka
ZirconMetal Algılama Derinliği
300mm
Saplama Algılama Derinliği
115 → 300mm
Kablo Algılama Derinliği
115mm
Pil Tipi
LR03 AAA
Güç Kaynağı
Batarya
Boyutlar
44 x 57 x 241mm
Ağırlık
235 (Without Battery)g
Yükseklik
241mm
Uzunluk
44mm
Maksimum Çalışma Sıcaklığı
+41°C
Minimum Çalışma Sıcaklığı
-7°C
Genişlik
57mm
Model Number p
Z67597
PRICED TO CLEAR
Yes
Ürün Ayrıntıları
Zircon ExitPoint XL300
The Exitpoint XL300 from Zircon is designed to accurately detect exit points before drilling and coring.
The XL300 is the easiest way to locate a precise spot without the need of measuring before starting work on your project.
It scans through most types of non-magnetic materials such as wood, drywall, gypsum panels, bricks and concrete up to 11.81 in (300 mm) thick.
Affix the transmitter magnet on the target spot, then scan the area of the other side of the wall. The receiver indicates it is near the centre of the transmitter by changing colour to red.
This simple yet effective tool improves efficiency and saves money by reducing guesswork, reworking, unnecessary holes and even damaged drill bits.
A must have for cable and wiring installations, concrete scanning or anytime through-hole drilling is required.
Supplied with
Receiver, small and large transmitter magnets, reusable adhesive discs, AAA batteries, quick reference guide and protective carrying case.