Teknik Belgeler
Özellikler
Marka
Amphenol ICCKontakların Sayısı
20
Sıraların Sayısı
2
Cinsiyet
Erkek
Hatve
1.27 mm, 2.54mm
Montaj Tipi
Kablo Montajı
Gövde Yönü
Dik Açı
Sonlandırma Yöntemi
Lehim
Akım Değeri
1A
Kontak Kaplaması
Kalay
Seri
TMM
Minimum Çalışma Sıcaklığı
-40.0°C
Maksimum Çalışma Sıcaklığı
105.0°C
Muhafaza Malzemesi
Termoplastik
Kontak Malzemesi
Fosfor Bronz
Menşe
China
Ürün Ayrıntıları
IDC Male Connectors
These Amphenol IDC TMM MicroMatch 1.27 mm pitch range of male Connectors are for Wire to Board connections when mated with the appropriate TMM MicroMatch female Header (see stock number 739-1136 typical). The ribbon wire size for these TMM MicroMatch Connectors is 1.27 mm pitch 28 AWG.
1.27mm IDC - Amphenol TMM Range
A range of Amphenol TMM MicroMatch 1.27 mm pitch (staggered contact spacing) Board to Board or Wire to Board connectors rated at 1.5 A, 230 Vac RMS 60 Hz, DC. These TMM MicroMatch connectors are available in even number of positions from 4 to 26. All the TMM MicroMatch contacts are fully tinned with the PCB tails also being kinked to improve header retention during soldering operations. Locking latches are available on the female TMM MicroMatch connectors and the male connectors have a polarization guide to ensure correct orientation.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
27,871 TL
Each (In a Bag of 700) KDV Hariç
33,445 TL
Each (In a Bag of 700) KDV Dahil
700
27,871 TL
Each (In a Bag of 700) KDV Hariç
33,445 TL
Each (In a Bag of 700) KDV Dahil
700
Teknik Belgeler
Özellikler
Marka
Amphenol ICCKontakların Sayısı
20
Sıraların Sayısı
2
Cinsiyet
Erkek
Hatve
1.27 mm, 2.54mm
Montaj Tipi
Kablo Montajı
Gövde Yönü
Dik Açı
Sonlandırma Yöntemi
Lehim
Akım Değeri
1A
Kontak Kaplaması
Kalay
Seri
TMM
Minimum Çalışma Sıcaklığı
-40.0°C
Maksimum Çalışma Sıcaklığı
105.0°C
Muhafaza Malzemesi
Termoplastik
Kontak Malzemesi
Fosfor Bronz
Menşe
China
Ürün Ayrıntıları
IDC Male Connectors
These Amphenol IDC TMM MicroMatch 1.27 mm pitch range of male Connectors are for Wire to Board connections when mated with the appropriate TMM MicroMatch female Header (see stock number 739-1136 typical). The ribbon wire size for these TMM MicroMatch Connectors is 1.27 mm pitch 28 AWG.
1.27mm IDC - Amphenol TMM Range
A range of Amphenol TMM MicroMatch 1.27 mm pitch (staggered contact spacing) Board to Board or Wire to Board connectors rated at 1.5 A, 230 Vac RMS 60 Hz, DC. These TMM MicroMatch connectors are available in even number of positions from 4 to 26. All the TMM MicroMatch contacts are fully tinned with the PCB tails also being kinked to improve header retention during soldering operations. Locking latches are available on the female TMM MicroMatch connectors and the male connectors have a polarization guide to ensure correct orientation.