Teknik Belgeler
Özellikler
Marka
BartecAydınlatmalı
Yes
Panel Oyuğu Çapı
30.5mm
Montaj Tipi
Panel Montajı
Kontak Yapılandırması
Tek Kutuplu Tek Atımlı (SPST)
IP Değeri
IP67
Seri
ComEx
Manufacturer Part No.
07-3363-3823/2000
Terminal Tipi
Kurşun Tel
Maksimum AC Gerilim
230V
Maksimum DC Gerilim
24V
Minimum Çalışma Sıcaklığı
-40°C
Tehlikeli Alan Sertifikası
ATEX
Maksimum Çalışma Sıcaklığı
+50°C
Menşe
Germany
Ürün Ayrıntıları
Illuminated Mounting Pushbutton
Illuminated pushbuttons in a range of colours, either N/O or N/C, for floor mounting on TS 35 x 7.5 DIN rail.
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
BartecAydınlatmalı
Yes
Panel Oyuğu Çapı
30.5mm
Montaj Tipi
Panel Montajı
Kontak Yapılandırması
Tek Kutuplu Tek Atımlı (SPST)
IP Değeri
IP67
Seri
ComEx
Manufacturer Part No.
07-3363-3823/2000
Terminal Tipi
Kurşun Tel
Maksimum AC Gerilim
230V
Maksimum DC Gerilim
24V
Minimum Çalışma Sıcaklığı
-40°C
Tehlikeli Alan Sertifikası
ATEX
Maksimum Çalışma Sıcaklığı
+50°C
Menşe
Germany
Ürün Ayrıntıları
Illuminated Mounting Pushbutton
Illuminated pushbuttons in a range of colours, either N/O or N/C, for floor mounting on TS 35 x 7.5 DIN rail.
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.