Acil Stop Şalteri, 3 + N Kutuplu, Panele Monte Montaj, 15 kW, 32 A, 3NO, IP65
Teknik Belgeler
Özellikler
Marka
EatonKutupların Sayısı
3 + N
Maksimum Akım
32A
Montaj Tipi
Panel Montajı
IP Değeri
IP65
Güç Değeri
15kW
Gerilim Değeri
690V
Elektrik Fazı
1, 3
Kol Rengi
Kırmızı
Kabul Edilen Asma Kilitler
Yes
Yardımcı Kontaklar Mevcut
No
Normal Durum Yapılandırması
3NO
Model Numarası
91079
Anahtar Derecesi
300A
Uzunluk
48mm
Genişlik
99mm
Derinlik
65mm
Terminal Tipi
Vida
Minimum Çalışma Sıcaklığı
-25°C
Atım Yapılandırması
Tek
Maksimum Çalışma Sıcaklığı
+50°C
Menşe
United Kingdom
Ürün Ayrıntıları
Eaton Non-Fused Switch Disconnectors - P1 Series Isolators
The P1 series of switch disconnectors from Eaton are compact and robust. This range of isolator switches is suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
With the metal extension shaft accessories, the P1 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
EatonKutupların Sayısı
3 + N
Maksimum Akım
32A
Montaj Tipi
Panel Montajı
IP Değeri
IP65
Güç Değeri
15kW
Gerilim Değeri
690V
Elektrik Fazı
1, 3
Kol Rengi
Kırmızı
Kabul Edilen Asma Kilitler
Yes
Yardımcı Kontaklar Mevcut
No
Normal Durum Yapılandırması
3NO
Model Numarası
91079
Anahtar Derecesi
300A
Uzunluk
48mm
Genişlik
99mm
Derinlik
65mm
Terminal Tipi
Vida
Minimum Çalışma Sıcaklığı
-25°C
Atım Yapılandırması
Tek
Maksimum Çalışma Sıcaklığı
+50°C
Menşe
United Kingdom
Ürün Ayrıntıları
Eaton Non-Fused Switch Disconnectors - P1 Series Isolators
The P1 series of switch disconnectors from Eaton are compact and robust. This range of isolator switches is suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
With the metal extension shaft accessories, the P1 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.