Teknik Belgeler
Özellikler
Marka
EatonGüç Değeri
11 kW
Motor Starteri Tipi
DOL
Gerilim Değeri
230 V ac
IP Değeri
IP55
Kutupların Sayısı
3P
Motor Starteri İşlevselliği
Otomatik
Ek Özellikler
Bağlantı Kesme Anahtarı Dahil
Toplam Uzunluk
184mm
Muhafaza
Yes
Toplam Genişlik
184mm
Toplam Derinlik
184mm
Ürün Ayrıntıları
D.O.L - Steel Enclosure
IP55 sheet steel enclosed starter complete with isolator for DOL applications to comply with IEE Regulations, 16th Edition on Isolation and Switching. AC-3 rated triple pole contactor with IP20 terminals and triple pole AC-3 rated switch disconnector with IP20 terminals fitted as standard. The disconnector has provision for up to 3 padlocks. The mushroom headed 'Stop' pushbutton is IP65 with the 'Start' pushbutton having an IP65 flush operator, both have IP20 terminals. Manufactured using readily available Eaton components which comply with the following specifications: isolator: IEC 943-3, pushbuttons: IEC 947-5-1, contactor: IEC 947-4-1. The enclosure is pre-wired to accept the Eaton Z00 or ZB thermal overloads which offer single phasing sensitivity to IEC 947-4. DOL starters comprise of an enclosure, switch disconnector, stop and start pushbuttons and a contactor.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
EatonGüç Değeri
11 kW
Motor Starteri Tipi
DOL
Gerilim Değeri
230 V ac
IP Değeri
IP55
Kutupların Sayısı
3P
Motor Starteri İşlevselliği
Otomatik
Ek Özellikler
Bağlantı Kesme Anahtarı Dahil
Toplam Uzunluk
184mm
Muhafaza
Yes
Toplam Genişlik
184mm
Toplam Derinlik
184mm
Ürün Ayrıntıları
D.O.L - Steel Enclosure
IP55 sheet steel enclosed starter complete with isolator for DOL applications to comply with IEE Regulations, 16th Edition on Isolation and Switching. AC-3 rated triple pole contactor with IP20 terminals and triple pole AC-3 rated switch disconnector with IP20 terminals fitted as standard. The disconnector has provision for up to 3 padlocks. The mushroom headed 'Stop' pushbutton is IP65 with the 'Start' pushbutton having an IP65 flush operator, both have IP20 terminals. Manufactured using readily available Eaton components which comply with the following specifications: isolator: IEC 943-3, pushbuttons: IEC 947-5-1, contactor: IEC 947-4-1. The enclosure is pre-wired to accept the Eaton Z00 or ZB thermal overloads which offer single phasing sensitivity to IEC 947-4. DOL starters comprise of an enclosure, switch disconnector, stop and start pushbuttons and a contactor.