Teknik Belgeler
Özellikler
Marka
FTDI ChipAlıcı-Vericilerin Sayısı
1
Veri Hızı
3MBd
Entegre Tipi
Controller
Desteklenen Protokoller
USB 1.1, USB 2.0
Güç Beslemesi Tipi
Tek
ESD Koruması
Yes
Tipik Tek Besleme Gerilimi
5 V
Montaj Tipi
Yüzeye Monte
Paket Tipi
QFN
Pim Sayısı
16
Boyutlar
4 x 4 x 0.75mm
Yükseklik
0.75mm
Uzunluk
4mm
Maksimum Çalışma Sıcaklığı
+85°C
Genişlik
4mm
Minimum Çalışma Sıcaklığı
-40°C
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
FT230X, FT231X, FT234XD - Full Speed USB to UART, FTDI Chip
The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface.
They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count.
Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They use as little bandwidth as possible.
The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
65,79 TL
Each (In a Pack of 10) KDV Hariç
78,948 TL
Each (In a Pack of 10) KDV Dahil
10
65,79 TL
Each (In a Pack of 10) KDV Hariç
78,948 TL
Each (In a Pack of 10) KDV Dahil
10
Teknik Belgeler
Özellikler
Marka
FTDI ChipAlıcı-Vericilerin Sayısı
1
Veri Hızı
3MBd
Entegre Tipi
Controller
Desteklenen Protokoller
USB 1.1, USB 2.0
Güç Beslemesi Tipi
Tek
ESD Koruması
Yes
Tipik Tek Besleme Gerilimi
5 V
Montaj Tipi
Yüzeye Monte
Paket Tipi
QFN
Pim Sayısı
16
Boyutlar
4 x 4 x 0.75mm
Yükseklik
0.75mm
Uzunluk
4mm
Maksimum Çalışma Sıcaklığı
+85°C
Genişlik
4mm
Minimum Çalışma Sıcaklığı
-40°C
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
FT230X, FT231X, FT234XD - Full Speed USB to UART, FTDI Chip
The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface.
They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count.
Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They use as little bandwidth as possible.
The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.