Teknik Belgeler
Özellikler
Marka
InfineonMotor Tipi
BLDC
Çıkış Yapılandırması
Tam Köprü
Maksimum IGBT Kollektör Akımı
42A
Maksimum Kollektör Emitör Gerilimi
40 V
Montaj Tipi
Yüzeye Monte
Paket Tipi
TO-263
Pim Sayısı
15
Maksimum Çalışma Besleme Gerilimi
42 V
Yükseklik
4.4mm
Genişlik
10.25mm
Minimum Çalışma Sıcaklığı
-40°C
Boyutlar
21.6 x 10.25 x 4.4mm
Maksimum Çalışma Sıcaklığı
+110°C
Otomotiv Standardı
AEC-Q100
Uzunluk
21.6mm
Ürün Ayrıntıları
Motor Driver ICs, Infineon
Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The TrilithIC integrates two high-side and two low-side switches which are meant to drive high-current DC motors in an H-bridge arrangement. Infineons single half-bridge drivers like NovalithIC are intended for automotive and industrial demands. Whereas the servo driver is widely used in head light beam control and the Stepper motor driver is for driving bipolar stepper motors.
Motor Controllers & Drivers, Infineon
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
265,955 TL
Each (On a Reel of 500) KDV Hariç
319,146 TL
Each (On a Reel of 500) KDV Dahil
500
265,955 TL
Each (On a Reel of 500) KDV Hariç
319,146 TL
Each (On a Reel of 500) KDV Dahil
500
Teknik Belgeler
Özellikler
Marka
InfineonMotor Tipi
BLDC
Çıkış Yapılandırması
Tam Köprü
Maksimum IGBT Kollektör Akımı
42A
Maksimum Kollektör Emitör Gerilimi
40 V
Montaj Tipi
Yüzeye Monte
Paket Tipi
TO-263
Pim Sayısı
15
Maksimum Çalışma Besleme Gerilimi
42 V
Yükseklik
4.4mm
Genişlik
10.25mm
Minimum Çalışma Sıcaklığı
-40°C
Boyutlar
21.6 x 10.25 x 4.4mm
Maksimum Çalışma Sıcaklığı
+110°C
Otomotiv Standardı
AEC-Q100
Uzunluk
21.6mm
Ürün Ayrıntıları
Motor Driver ICs, Infineon
Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The TrilithIC integrates two high-side and two low-side switches which are meant to drive high-current DC motors in an H-bridge arrangement. Infineons single half-bridge drivers like NovalithIC are intended for automotive and industrial demands. Whereas the servo driver is widely used in head light beam control and the Stepper motor driver is for driving bipolar stepper motors.