Teknik Belgeler
Özellikler
Marka
InvenSenseHassasiyet
-27 → -25dB
Yönelme
Tüm Yönlü
Standart Çalışma Gerilimi
1.62 → 3.63V
Montaj Tipi
Yüzeye Monte
Sinyal - Gürültü Oranı
65dB(A)
Maksimum Besleme Akımı
24µA
Boyutlar
4 x 3 x 1mm
Yükseklik
1mm
Maksimum Frekans
20kHz
Maksimum Çalışma Sıcaklığı
+85°C
Minimum Frekans
50Hz
Minimum Çalışma Sıcaklığı
-40°C
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
Digital MEMS Microphone - ICS-43432, InvenSense
The ICS-43432 is a low-noise MEMS microphone with an I2S digital output. The InvenSense digital microphone ICS43432 has fully decimated outputs that allow them to be connected directly into microcontrollers (MCU) and DSPs. The device contains a MEMS sensor, an analog to digital converter, signal conditioning, decimation and anti-aliasing filters along with a 24-bit I2S interface.
The digital microphone is bottom ported and has a high signal to noise ratio (SNR) along with a wideband frequency response It is also perfect when an audio codec design is not needed. The applications include wearables, remote controls, teleconferencing systems, gaming consoles, security systems, and microphone arrays.
Audio & Acoustic Sensors, Invensense
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
5000
P.O.A.
5000
Teknik Belgeler
Özellikler
Marka
InvenSenseHassasiyet
-27 → -25dB
Yönelme
Tüm Yönlü
Standart Çalışma Gerilimi
1.62 → 3.63V
Montaj Tipi
Yüzeye Monte
Sinyal - Gürültü Oranı
65dB(A)
Maksimum Besleme Akımı
24µA
Boyutlar
4 x 3 x 1mm
Yükseklik
1mm
Maksimum Frekans
20kHz
Maksimum Çalışma Sıcaklığı
+85°C
Minimum Frekans
50Hz
Minimum Çalışma Sıcaklığı
-40°C
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
Digital MEMS Microphone - ICS-43432, InvenSense
The ICS-43432 is a low-noise MEMS microphone with an I2S digital output. The InvenSense digital microphone ICS43432 has fully decimated outputs that allow them to be connected directly into microcontrollers (MCU) and DSPs. The device contains a MEMS sensor, an analog to digital converter, signal conditioning, decimation and anti-aliasing filters along with a 24-bit I2S interface.
The digital microphone is bottom ported and has a high signal to noise ratio (SNR) along with a wideband frequency response It is also perfect when an audio codec design is not needed. The applications include wearables, remote controls, teleconferencing systems, gaming consoles, security systems, and microphone arrays.