Teknik Belgeler
Özellikler
Marka
MicrochipKontrol Arayüzü
Seri SPI
Direnç Değeri
10kΩ
Konumların Sayısı
256
Bellek Tipi
Geçici
Paket Başına Pot Sayısı
1
Montaj Tipi
Yüzeye Monte
Paket Tipi
TSSOP
Pim Sayısı
14
Güç Beslemesi Tipi
İkili, Tek
Tipik Tek Besleme Gerilimi
36 V
Tipik Çift Besleme Gerilimi
±18V
Boyutlar
5.1 x 4.5 x 1.05mm
Yükseklik
1.05mm
Minimum Çalışma Sıcaklığı
-40°C
Genişlik
4.5mm
Maksimum Çalışma Sıcaklığı
+125°C
Uzunluk
5.1mm
Ürün Ayrıntıları
MCP45HVx1 Digital Potentiometers
The MCP45HVx1 family of devices from Microchip are Digital Potentiometers with an SPI Interface and on board Volatile Memory. The device family has dual power rails, one analogue one digital. The Analogue power rail can handle up to +36 V and can be implemented as a dual rail (±18 V) relative to the digital logic ground.
The MCP45HVx1 has a Write Latch (WLAT) function that inhibits the volatile wiper register from being updated (latched) with received data until the WLAT pin is low. This allows the specification of a condition where the volatile wiper register is updated (such as zero crossing).
Digital Potentiometer - Microchip
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
72,369 TL
Each (Supplied in a Tube) KDV Hariç
86,843 TL
Each (Supplied in a Tube) KDV Dahil
4
72,369 TL
Each (Supplied in a Tube) KDV Hariç
86,843 TL
Each (Supplied in a Tube) KDV Dahil
4
Toptan Satın Al
Miktar | Birim Fiyat | Per Tüp |
---|---|---|
4 - 16 | 72,369 TL | 289,48 TL |
20 - 44 | 62,479 TL | 249,92 TL |
48 - 196 | 59,254 TL | 237,02 TL |
200+ | 53,879 TL | 215,52 TL |
Teknik Belgeler
Özellikler
Marka
MicrochipKontrol Arayüzü
Seri SPI
Direnç Değeri
10kΩ
Konumların Sayısı
256
Bellek Tipi
Geçici
Paket Başına Pot Sayısı
1
Montaj Tipi
Yüzeye Monte
Paket Tipi
TSSOP
Pim Sayısı
14
Güç Beslemesi Tipi
İkili, Tek
Tipik Tek Besleme Gerilimi
36 V
Tipik Çift Besleme Gerilimi
±18V
Boyutlar
5.1 x 4.5 x 1.05mm
Yükseklik
1.05mm
Minimum Çalışma Sıcaklığı
-40°C
Genişlik
4.5mm
Maksimum Çalışma Sıcaklığı
+125°C
Uzunluk
5.1mm
Ürün Ayrıntıları
MCP45HVx1 Digital Potentiometers
The MCP45HVx1 family of devices from Microchip are Digital Potentiometers with an SPI Interface and on board Volatile Memory. The device family has dual power rails, one analogue one digital. The Analogue power rail can handle up to +36 V and can be implemented as a dual rail (±18 V) relative to the digital logic ground.
The MCP45HVx1 has a Write Latch (WLAT) function that inhibits the volatile wiper register from being updated (latched) with received data until the WLAT pin is low. This allows the specification of a condition where the volatile wiper register is updated (such as zero crossing).