Teknik Belgeler
Özellikler
Marka
MoflashBesleme Gerilimi
12 → 48 V dc
Işık Etkisi
Yanıp Sönen, Dönen, Sabit
Mercek Rengi
Kehribar
Montaj Stili
Tabana Monte
Ampul Tipi
LED
Akım Tipi
DC
Muhafaza Rengi
Kırmızı
Lamba Dahil
Yes
Seri
BC 125
Yükseklik
90mm
Taban Uzunluğu
125mm
Tehlikeli Alan Sertifikası
ATEX
Maksimum Sıcaklık
+70°C
Taban Genişliği
125mm
Minimum Sıcaklık
-40°C
Menşe
France
Ürün Ayrıntıları
Explosion Proof Beacon, BC125 Series
The BC125 beacon has been approved for use in potentially explosive atmospheres, hazardous areas and very harsh environmental conditions.
Typical applications are Oil and Gas, On-shore & Offshore, Chemical, Petrochemical, Refineries & Marine locations, etc.
This warning beacon has a choice of two types of light source: either Xenon (strobe) with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings. The design of this beacon allows for termination inside the enclosure.
Approvals
Approved by ATEX and CQST, IMETRO and IECEX
ATEX: II 2G Exd IIC T4 - T6 (incorporating IIA & IIB)
Zones 1 & 2, zones 21 & 22
Standards
Conforms to EN (IEC) 60079-0, EN (IEC) 60079-1 and EN54.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
MoflashBesleme Gerilimi
12 → 48 V dc
Işık Etkisi
Yanıp Sönen, Dönen, Sabit
Mercek Rengi
Kehribar
Montaj Stili
Tabana Monte
Ampul Tipi
LED
Akım Tipi
DC
Muhafaza Rengi
Kırmızı
Lamba Dahil
Yes
Seri
BC 125
Yükseklik
90mm
Taban Uzunluğu
125mm
Tehlikeli Alan Sertifikası
ATEX
Maksimum Sıcaklık
+70°C
Taban Genişliği
125mm
Minimum Sıcaklık
-40°C
Menşe
France
Ürün Ayrıntıları
Explosion Proof Beacon, BC125 Series
The BC125 beacon has been approved for use in potentially explosive atmospheres, hazardous areas and very harsh environmental conditions.
Typical applications are Oil and Gas, On-shore & Offshore, Chemical, Petrochemical, Refineries & Marine locations, etc.
This warning beacon has a choice of two types of light source: either Xenon (strobe) with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings. The design of this beacon allows for termination inside the enclosure.
Approvals
Approved by ATEX and CQST, IMETRO and IECEX
ATEX: II 2G Exd IIC T4 - T6 (incorporating IIA & IIB)
Zones 1 & 2, zones 21 & 22
Standards
Conforms to EN (IEC) 60079-0, EN (IEC) 60079-1 and EN54.