Flaşör, LED, Yeşil, Yanıp Sönen, Yüzeye Monte, Duvara Monte, 8 → 20 V ac/dc
Teknik Belgeler
Özellikler
Marka
MoflashBesleme Gerilimi
8 → 20 V ac/dc
Işık Etkisi
Yanıp Sönen
Mercek Rengi
Yeşil
Montaj Stili
Yüzeye Monte
Ampul Tipi
LED
Akım Tipi
AC, DC
Taban Çapı
72mm
Muhafaza Rengi
Siyah
Lamba Dahil
Yes
Seri
LEDS100
Çok İşlevli
Yes
Yükseklik
107mm
IP Değeri
IP65
Taban Uzunluğu
33mm
Minimum Sıcaklık
-25°C
Maksimum Sıcaklık
+55°C
Diğer Özellikler
Toza Dayanıklı, Düşük Akım Tüketimi, Suya Karşı Dayanıklı
Menşe
United Kingdom
Ürün Ayrıntıları
Moflash Industrial ECO LED Beacon - LEDS100 Series
The LEDS100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.
The ECO LEDS beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.
This design allows for termination inside the enclosure through the base of the beacon, either from directly below or using a 6mm cabling channel at 90° to the base for surface cabling. The LEDS incorporates two mounting studs 2 x 5mm on 45mm centres.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
MoflashBesleme Gerilimi
8 → 20 V ac/dc
Işık Etkisi
Yanıp Sönen
Mercek Rengi
Yeşil
Montaj Stili
Yüzeye Monte
Ampul Tipi
LED
Akım Tipi
AC, DC
Taban Çapı
72mm
Muhafaza Rengi
Siyah
Lamba Dahil
Yes
Seri
LEDS100
Çok İşlevli
Yes
Yükseklik
107mm
IP Değeri
IP65
Taban Uzunluğu
33mm
Minimum Sıcaklık
-25°C
Maksimum Sıcaklık
+55°C
Diğer Özellikler
Toza Dayanıklı, Düşük Akım Tüketimi, Suya Karşı Dayanıklı
Menşe
United Kingdom
Ürün Ayrıntıları
Moflash Industrial ECO LED Beacon - LEDS100 Series
The LEDS100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.
The ECO LEDS beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.
This design allows for termination inside the enclosure through the base of the beacon, either from directly below or using a 6mm cabling channel at 90° to the base for surface cabling. The LEDS incorporates two mounting studs 2 x 5mm on 45mm centres.