RS PRO Hibrit Step Motoru, Unipolar, 2 A, 1.2Nm, 8 Kablolu, 1,8°, 3 V dc
Teknik Belgeler
Özellikler
Marka
RS ProStep Motor Tipi
Hibrit
Adım Açısı
1.8Derece
Tutma Torku
1.2Nm
Kabloların Sayısı
8
Besleme Gerilimi
3 V
Çerçeve Boyutu
82.6 x 82.6mm
Mil Çapı
9.5mm
Akım Değeri
2 A
Sargı Düzeni
Tek Kutuplu
Mil Uzunluğu
121.4mm
Derinlik
62.5mm
Kademe Başına Direnç
1.5Ω
Karşılanan Standartlar
RoHS Uyumlu
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
Stepper Motors With/Without Rear Shaft Extensions
RS Pro stepper motors with 6 or 8 lead configuration.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
RS ProStep Motor Tipi
Hibrit
Adım Açısı
1.8Derece
Tutma Torku
1.2Nm
Kabloların Sayısı
8
Besleme Gerilimi
3 V
Çerçeve Boyutu
82.6 x 82.6mm
Mil Çapı
9.5mm
Akım Değeri
2 A
Sargı Düzeni
Tek Kutuplu
Mil Uzunluğu
121.4mm
Derinlik
62.5mm
Kademe Başına Direnç
1.5Ω
Karşılanan Standartlar
RoHS Uyumlu
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
Stepper Motors With/Without Rear Shaft Extensions
RS Pro stepper motors with 6 or 8 lead configuration.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: