RS Pro Nikel Kaplamalı Pirinç Pilot Uyarılı Küresel Vana 2 inç BSP
Teknik Belgeler
Özellikler
Marka
RS ProTip
2 Yönlü
Bilya Malzemesi
Krom Kaplamalı Pirinç
Bağlantı Tipi
Dişli
Konu Standart
BSP
Diş Boyutu
2inç
Gövde Malzemesi
Nikel Kaplamalı Pirinç
Boru Çapı
50mm
Kol Tipi
Kol
Kol Malzemesi
Steel
Çalışma Basıncı
16bar
Handle Colour
Red
Menşe
Italy
Ürün Ayrıntıları
S.81 Side Drain Brass Ball Valve - 1/4 Turn
Warning
Freezing of the fluid in the installation may severely damage the valve
Approvals
GOST-R (Russia)
Expert Conclusion (Russia)
EAC Conforming (Russia)
RoHS Compliant
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
3.569,79 TL
Each KDV Hariç
4.283,75 TL
Each KDV Dahil
1
3.569,79 TL
Each KDV Hariç
4.283,75 TL
Each KDV Dahil
1
Toptan Satın Al
| Miktar | Birim Fiyat |
|---|---|
| 1 - 4 | 3.569,79 TL |
| 5 - 9 | 3.475,56 TL |
| 10+ | 3.377,84 TL |
Teknik Belgeler
Özellikler
Marka
RS ProTip
2 Yönlü
Bilya Malzemesi
Krom Kaplamalı Pirinç
Bağlantı Tipi
Dişli
Konu Standart
BSP
Diş Boyutu
2inç
Gövde Malzemesi
Nikel Kaplamalı Pirinç
Boru Çapı
50mm
Kol Tipi
Kol
Kol Malzemesi
Steel
Çalışma Basıncı
16bar
Handle Colour
Red
Menşe
Italy
Ürün Ayrıntıları
S.81 Side Drain Brass Ball Valve - 1/4 Turn
Warning
Freezing of the fluid in the installation may severely damage the valve
Approvals
GOST-R (Russia)
Expert Conclusion (Russia)
EAC Conforming (Russia)
RoHS Compliant
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.