Teknik Belgeler
Özellikler
Transistör Tipi
NPN
Yonga Başına Eleman Sayısı
1
Pim Sayısı
3
Transistör Yapılandırması
Tek
Minimum DC Akım Kazancı
25
Montaj Tipi
Açık Delik
Maksimum Çalışma Frekansı
3 MHz
Maksimum Emitör Taban Gerilimi
5 V
Maksimum Çalışma Sıcaklığı
+150°C
Maksimum DC Kollektör Akımı
2 A
Maksimum Kollektör Taban Gerilimi
80 V
Maksimum Kollektör Emitör Gerilimi
80 V
Maksimum Güç Kaybı
25 W
Paket Tipi
SOT-32
Marka
STMicroelectronicsBoyutlar
10.8 x 7.8 x 2.7mm
Ürün Ayrıntıları
Angle Holder for Flexible Light Guides
The angle holders, from MENTOR, are designed for use with 2-mm and 3-mm flexible light pipes. The holder enables the user to position their light pipe at a 90° angle, redirecting the light to the desired interface. This positioning allows the front panel to sit perpendicular to the PCB.
The curvature of the angle holder supports the light pipe without applying stress to the pipe itself. Simply place the light pipe into the holder for a quick and easy design solution.
LED Light Pipes, MENTOR - Accessories
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
50
P.O.A.
50
Teknik Belgeler
Özellikler
Transistör Tipi
NPN
Yonga Başına Eleman Sayısı
1
Pim Sayısı
3
Transistör Yapılandırması
Tek
Minimum DC Akım Kazancı
25
Montaj Tipi
Açık Delik
Maksimum Çalışma Frekansı
3 MHz
Maksimum Emitör Taban Gerilimi
5 V
Maksimum Çalışma Sıcaklığı
+150°C
Maksimum DC Kollektör Akımı
2 A
Maksimum Kollektör Taban Gerilimi
80 V
Maksimum Kollektör Emitör Gerilimi
80 V
Maksimum Güç Kaybı
25 W
Paket Tipi
SOT-32
Marka
STMicroelectronicsBoyutlar
10.8 x 7.8 x 2.7mm
Ürün Ayrıntıları
Angle Holder for Flexible Light Guides
The angle holders, from MENTOR, are designed for use with 2-mm and 3-mm flexible light pipes. The holder enables the user to position their light pipe at a 90° angle, redirecting the light to the desired interface. This positioning allows the front panel to sit perpendicular to the PCB.
The curvature of the angle holder supports the light pipe without applying stress to the pipe itself. Simply place the light pipe into the holder for a quick and easy design solution.