Teknik Belgeler
Özellikler
Marka
TE ConnectivityKontakların Sayısı
6
Hatve
2.0mm
Montaj Tipi
Kablo Montajı
Gövde Yönü
Düz
Sonlandırma Yöntemi
Sıkıştırma
Akım Değeri
3A
Seri
RITS
Minimum Çalışma Sıcaklığı
-30.0°C
Maksimum Çalışma Sıcaklığı
+75°C
Gerilim Değeri
32 V dc
Kontak Malzemesi
Bakır Alaşım
Ürün Ayrıntıları
TE Connectivity RITS Plug and Socket Connectors
RITS (Remote Input/Output Terminal System) plug and socket connectors with a high density 2.0 mm centreline designed for use as the standard interface connector for sensors. The 4 way RITS connector is approved as the industry standard connector. These RITS connectors have an integrated locking lever for a secure wire to wire connection and can be pulled through a partially jammed wiring duct. An audible click provides assurance of positive mating. The RITS plug connectors feature Chisel Press Contacts. The chisel part of the contact pierces the wire to create a large contact area, no prior wire preparation is required. The press part of the contact keeps the contact pressure applied. Two points of contact provide high contact reliability including under conditions shock and vibration. The cable retention mechanism on the contact retains the wire with a higher retention force than traditional IDC connectors. The housings of these RITS connectors are colour coded to indicate wire size and are semi-transparent enabling visual inspection of the connection. These RITS connectors allow terminations to be made easily and quickly with increased electrical reliability.
2.0mm Tyco RITS™ Connector System
The RITS connector (Remote I/O Terminal System) from Tyco Electronics is the new termination standard developed in Japan to solve non-compatibility issue when terminating sensors to Programmable Logic Controllers (PLC). RITS is a quick and highly reliable wire-to-board and wire-to-wire connection system that reduces installation time by up to 80% in Factory Automation applications. Chisel Press Contact termination technology enables larger contact by the chisel shaped contact which pierces into the cable and secures a larger contact area. The retention mechanism retains the cable at higher retention force than IDC connectors. The press function will keep the contact pressure for the life of the connection.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
186,294 TL
Each (In a Tube of 24) KDV Hariç
223,553 TL
Each (In a Tube of 24) KDV Dahil
24
186,294 TL
Each (In a Tube of 24) KDV Hariç
223,553 TL
Each (In a Tube of 24) KDV Dahil
24
Toptan Satın Al
Miktar | Birim Fiyat | Per Tüp |
---|---|---|
24 - 48 | 186,294 TL | 4.471,06 TL |
72 - 96 | 171,037 TL | 4.104,88 TL |
120+ | 155,196 TL | 3.724,72 TL |
Teknik Belgeler
Özellikler
Marka
TE ConnectivityKontakların Sayısı
6
Hatve
2.0mm
Montaj Tipi
Kablo Montajı
Gövde Yönü
Düz
Sonlandırma Yöntemi
Sıkıştırma
Akım Değeri
3A
Seri
RITS
Minimum Çalışma Sıcaklığı
-30.0°C
Maksimum Çalışma Sıcaklığı
+75°C
Gerilim Değeri
32 V dc
Kontak Malzemesi
Bakır Alaşım
Ürün Ayrıntıları
TE Connectivity RITS Plug and Socket Connectors
RITS (Remote Input/Output Terminal System) plug and socket connectors with a high density 2.0 mm centreline designed for use as the standard interface connector for sensors. The 4 way RITS connector is approved as the industry standard connector. These RITS connectors have an integrated locking lever for a secure wire to wire connection and can be pulled through a partially jammed wiring duct. An audible click provides assurance of positive mating. The RITS plug connectors feature Chisel Press Contacts. The chisel part of the contact pierces the wire to create a large contact area, no prior wire preparation is required. The press part of the contact keeps the contact pressure applied. Two points of contact provide high contact reliability including under conditions shock and vibration. The cable retention mechanism on the contact retains the wire with a higher retention force than traditional IDC connectors. The housings of these RITS connectors are colour coded to indicate wire size and are semi-transparent enabling visual inspection of the connection. These RITS connectors allow terminations to be made easily and quickly with increased electrical reliability.
2.0mm Tyco RITS™ Connector System
The RITS connector (Remote I/O Terminal System) from Tyco Electronics is the new termination standard developed in Japan to solve non-compatibility issue when terminating sensors to Programmable Logic Controllers (PLC). RITS is a quick and highly reliable wire-to-board and wire-to-wire connection system that reduces installation time by up to 80% in Factory Automation applications. Chisel Press Contact termination technology enables larger contact by the chisel shaped contact which pierces into the cable and secures a larger contact area. The retention mechanism retains the cable at higher retention force than IDC connectors. The press function will keep the contact pressure for the life of the connection.